1.The selection of models and types The use of pneumatic tools requires the selection of the appropriate machine type and model.
2.Pneumatic tool air consumption and air compressor capacity In order for pneumatic tools to operate, a certain amount of compressed air is necessary. Comparing the air consumption of the tool and the capacity of the air compressor, the basic condition is that the capacity of the air compressor has a relatively ample capacity. When the air capacity is insufficient, or the air capacity is low, the tool may reduce its performance or stop working. Basically, a 0.1m3/min air consumption must be used with a 0.75kw air compressor, so a tool with an air consumption of 1.0m3/min can be continuously used with a 7.5kw air compressor.
3.Correct air pressure The highest efficiency is achieved when the air pressure at the tool is set at 0.6MPa (6Kgf/cm3). When the pressure is below 0.6MPa (6Kgf/cm3), the tool's performance will decrease, and when it is above 0.7MPa (7Kgf/cm3), it is easy to cause accidents or failures.
4.Piping The connection point between the air compressor and the tool should avoid pressure loss. Pneumatic tools should use special pressure-resistant tubes. When using tools extensively or when the air compressor is far away, it is necessary to have a piping of 25-38m/m.
5.Water vapor and moisture evaporation The water and air in the air compressor and piping must be cleared daily, and the use of clean air is a necessary tool for maintaining tools.
6.Lubrication and Management Before and after using the tool, make sure to add air compressor oil (1-2C.C) to lubricate the tool and prevent rust. Avoid throwing, rolling, or dropping the tool during use to prevent dust or other foreign objects from entering the tool's interior.
Finding high quality products in Yiwu
China, Yiwu China Commodity Market (Yiwu wholesale market), the
World's Largest Commodities Trading Center Online.
