AB胶是两液混合硬化胶的别称，一液是本胶，一液是硬化剂，两液相混才能硬化，是不需要靠温度来硬应熟成的，所以是常温硬化胶的一种，做模型有时会用到，一般用于工业。同时，AB胶也有双组分胶粘剂的叫法，市售有丙烯酸、环氧、聚氨酯等成分的AB胶。

厂家直销；（可定牌）欢迎来电咨询，给您最好的质量，最低的价格！！

联系电话：18329019386 

微信：306230336 

Specifications:

1, Epoxy seal 
2, Two components 
3, Fast curing 
4, Sulfur hardener

 

Advantage:

* Exceptional strength to handle repairs of steel, aluminum, copper, wood, glass and plastic
* Easy to use, two-part adhesive and filler, bonds and repairs almost any material
* Eliminate the need for welding or brazing
* Ideal for home and automotive use

 

 

Using Method:

1. The surface should be clean and dry, without oil or wax

2. Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly,

3. Press it according to the actual condition.

It could achieve the using intensity after the solidifying for one hour during the normal temperature; it is suggested to operate at above 5oC.

 

 

Warning:

1. It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much.

2. Tighten the caps after usage. Do not mix the cap of part A and B.

3. Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.

4. Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.

5. Take strict precautions against touching by the kids and entering into the mouth.

 

 

Instruction:

• Clean the surface of the material, make sure they have no dust or oil on them.
• Mixing A and B in the proportion of 1:1 with adhesive smear, glue within 3 minutes at room temperature. Bond by the aid of fingers, set in 5 to 10 minutes. 50% of wanted strength reaches after 30 minutes. The highest strength reaches after 24 hours. 
• Fully curing needs 24 hours. Can be used at temperature of -60° ~ 100°C.

 

Part of our products have been displayed on the website, please contact us if you want to know more about the products.

Factory direct Sale ,If you are interest in our products ,please contact we us,we will give you best price ,our product can made under your trade mark.