[type]: imported beads of the latest CREE XM-L T6 lamp
[life span]: 100000H
[material]: aerospace grade reinforced materials
[surface treatment]: the torch head by air Aluminum Alloy, cylinder body is made of high density engineering plastics
[material]: high-quality thick lens optical lens [range]
diving: 60
[M] battery: 18650 battery voltage: 3.7-4.2V

[] [] [
lighting mode: strong charging time: 3-4 hours
] [Specification]: 35 (head diameter) 25mm* (tail length diameter) 120mm
[weight]: 80g (excluding battery)
[]: rotary switch switch

Products with high brightness, not a long time direct eye!

[operation description]

The battery
1 counter clockwise rotation under the flashlight rear cover
2 according to the battery of the tail cap direction into the battery
3 flashlight rear cover back flashlight and tighten clockwise

Open the flashlight:
rotary switch, open the flashlight

Turn off the flashlight:
rotary switch, turn off the flashlight.

[note]

1 this product uses 18650 lithium battery, the battery, should pay attention to the polar direction of the battery, battery should be in the direction of the lamp cap, anti installed battery would make the torch will not shine. This product is 2
long-range light flashlight, please do not direct the eyes, otherwise it will cause temporary blindness. Please put the flashlight in the reach of children
3 purchase of new lithium battery, please charge it for 4 hours before use, the battery can not be completely without electricity in charge, which is easy to scrap batteries. 4 in the dark
flashlight when you time to charge the lithium battery, don't charge the battery positive and negative polarity reversed, otherwise it will not contact the 5
scrap battery flashlight and long chemical products and corrosive gas, to avoid damage to the torch protection layer: 6
to keep the thread moving smoothly, according to the annual 2-3 on its surface wipe Vaseline
7 for display, photographic equipment and other factors, may be physical and photos are not the same, this shop when do their best to make the goods as described, if the difference can not accept, please contact address