Models are: 1157 double contact high and low feet 1156 single contact flat feet T20 double silk model T20 single silk model 1156 single contact crooked foot model multiple models

Product Model: S25 27SMD 5050(1156 1157 T20) single/double contact

1157 BAY15D (dual contact high and low feet) dual contact brake lights, driving lamp

1156 BA15S (single contact flat foot) single contact steering lamp, reversing lamp

Size: total length 52mm, maximum straight diameter 20mm

Color: white blue Red Yellow Green

Product description:

Can be used as driving lamp/rear lamp/brake lights, rear fog lights, reversing lights, etc,
· The model is the same as the original car, do not change the line, directly replace the original car glass bulb,
· No delay in lighting, low power consumption, power saving and oil saving,
· No filament structure, no heat, vehicle control circuit is not easy to oxidize
· Good Comfort, belonging to green color light source

Install caution:

No need to modify the circuit, directly replace the original traditional glass bulb, pay attention to the original bulb temperature is relatively high, to prevent burns!

Refer to the product shape and size when installing. Pay attention to the size of the installation position space. Press it carefully and do not squeeze the LED chip to avoid damage. The LED has Positive pole and negative pole. If it is not bright, reinstall it in the turning direction;

Buyers who purchase turn signals please note: most of the cars will flash quickly after replacing the LED steering lamp, because the car flasher has the function of automatically detecting broken bulb wire, that is, when one or two bulbs on one side of the steering lamp are damaged, the flashing frequency will be accelerated to remind the driver to go out of order. The LED lamp will detect that the bulb is damaged due to its lower power than the bulb, so the flashing frequency will increase, in this case, just go to the repair shop or other channels to buy the flasher to replace the flasher of the original car with an electronic flasher, or purchase a strobe electronic resistance to connect to the lamp holder. Buyers should not use this reason as the reason for returning the goods.