car high-power super bright one-to-four ultra-thin medium network strobe light wireless modified car decoration lamp

Flashing light features

1. The new design, the light body uses individual imported light beads.1000LED lights, each with four LED beads, totalfour Ws,Ultra-brightness, flash effect fashion! Suitable for high-end vehicles!!!

2.multiple flash methods"Change, there isConstant-on mode and strobe modeCan be connected to an alarm system.Lighting colors available: White light, red and blue light2A Choice。

3. Easy to install and remove, the light is fixed with clamps, featuring a fall-proof design. The clamps securely hold the light in place, making installation and removal convenient.NoDestroying the original vehicle structureAfter installation,High stealthiness

Technical parameters:

Working Voltage: DC12V;

Working current: ≤1.5A;

Luminaire: Single LED 1W.

Light color: Red and blue light / White light.

Lamp shade color: transparent.

Function Introduction: Multiple Modes Available

 Buyers' attention:

1. The light emits red, blue, or full white, with two options: red and blue light are beautiful, while full white light is brighter. Full white light has a high brightness and strong penetrability, making it suitable for use as a daytime running light. It has multiple uses.

.2. The lamp installation is simple; simply slot it onto the grille board. If you are unsure, you can also use adhesive to fix it in place.

.3. This lamp has two wires: the red wire connects to the ACC (starting wire), and the black wire connects to the negative battery terminal. This enables the car to start when the light is on. It can also be connected to other circuits, with the switch controlled by that circuit.

.4. The switch can be connected to the interior (the wire is long enough to be connected into the buyer or can be extended by the buyer), which can be connected into the driver's cabin through the floor mat. Please refer to the structure of the buyer's own car for specific circumstances.

.5. The light set is waterproof, but the main box is not. Please install the main box in a waterproof place in the engine room, and wrap the interface with black tape.