How to wear a full body belt correctly
Step 1: check your seat belt
Hold the d-ring buckle on the back pad of the seat belt to ensure the ribbon is not wrapped.
Step 2: start wearing your seat belt
willsecuritywithSlide your arms over your shoulders. Ensure all webbing is free of entanglement and free suspension. The straps must be vertical and not close to the center of the body.
Step 3: tape the legs
Grab the straps of your leg and attach them to the straps of the fabric on either side of your hips. Insert the extra length webbing into the adjustment ring
Step 4: chest ribbon
The bra strap is attached to each other through a slip-on buckle. The tape must be 15 cm below the shoulders. The extra length of the ribbon is inserted into the adjustment ring.
Step 5: adjust your seat belt
Shoulder: adjust the entire length of the webbing from the shoulder to make sure the height of the leg webbing is just below the hips and the back d-ring is between the shoulder blades.
Legs: then adjust the ribbon of the legs, trying to do a single leg forward extension and squatting, adjust the length of the ribbon used on both sides of the legs.
Chest: the ribbon of the chest should cross in the middle of the chest, and about three hands away from the base of the sternum guide the width.
A full-body seat belt, properly worn and adjusted, effectively breaks down the impact force into the whole body, providing certain levitation support and falling rescue.