Direct from the manufacturer: contact us for quantity, price can be negotiated to the lowest price, quality assurance, you can also contact the owner at the store: 15727915627
Store address: 4th floor, 4th street, 68345, door 105, International Trade City, Zone 5

The latest model of the sticker lightning game light features scanning, breathing, running horse, and flow.

Water mode, no remote control needed, automatically changes!

Skin-mounted ThunderPunks lights are based on ordinary skin-mounted lights and have added ThunderPunks lights.

的模式！

Skin-mounted Thunder Patrol light can be connected to the front grille, license plate frame, and can also be connected to the high position brake.

Light!

Dimensions: Length: 30CM x 60CM, Width: 1CM, Thickness: 0.15CM

Suitable for vehicles: General for cars, motorcycles, and electric vehicles with a 12V voltage.

Life span of 50,000 hours or more

Product Introduction: No remote control required, the product will flash automatically upon power-on. It cannot be controlled and will cycle through 15 different patterns automatically.

A string of lights has 48 high-brightness LED chips, with a 1210-type LED specification. The light is not bright.

Gathered at one point, the light that shines out looks soft and even. The brightness is high,This Thunderbolt

The Lightning is a soft strip light type, with the control chip integrated into the light strip, and it can be directly connected to the power to

The light strip can be pasted freely to the dry surface. The 15 modes are set to automatically cycle through.

Clean the surface of the object. You can stick it to the rear of the car as a brake light, or connect it to the vehicle.

The lighting effect is really great.

The set includes: one sticker lightning bolt light that can be directly attached, with a 3M double-sided tape on the back.

Directly connect the adhesive to the power source without any other devices.

Installation Tip:

When installing the light strip, do not pull it. If the weather is very cold, you can use it.

Blow-dry the adhesive first to increase its adhesive strength, and the adhesive will also be more flexible.

When installing, do not pull the wire ends, or they may be pulled off.

Installation Method:

1. Black power cable connects to the negative terminal, or it can be connected to the vehicle's metal body, which is known as grounding.

2.. Red wire connected to the positive power supply. Generally, it is not connected to the battery because connecting to the battery causes a lot of interference. Some car lights may exhibit random code phenomena, so it is usually connected to the turn signal or connected together with another light. It can also be independently connected to a switch. In any case, as long as it is connected to a 12V positive power supply, it will light up.