"Instructions for use":

And connection procedures are as follows:
(1) first start wire red wire clamp in the "saved cart" above the Red cathode.

(2) then plug the other end of the Red wire clamp in the "rescue" above the Red cathode.

(3) wire clamp in black "was saved ' the black negative battery.

(4) wire clamp in black "rescue" the black negative battery.

(5) start the "rescue" engine, and then start "rescued" engine. If rescued the car still will not start,

Check that the metal part is bad.

Note: when you finish after starting the engine, still needs to be removed in order to start up the line of fire, or they may cause a short circuit.

Second, removal of wiring procedure is as follows:

(1) the first "rescued" black wires down.

(2) then "salvage vehicle" black wires down.

(3) and "rescue" lowered the Red wire.

(4) the "rescued" lowered the Red wire.

The 500A battery line for export packaging.

"Note":

1, when the car cannot start without electricity, which can be started by the vehicle's battery. Bold battery start line

By current 500AMP generally suited to 2500cc petrol engine displacement or displacement less than 2000cc

Use between diesel engine battery.

2, two cars cannot have any contact, two car electronic systems must have the same voltage. If battery freezing up, please do not

Use the start line.

3, before the two car engines, stereo, air condition are expected to turn the

When your car won't run out of power the car don't worry, catch a taxi from the roadside two clips easily. Cars rarely when there is no electricity, but once out of power, really sudden death. not afraid of 10,000, but just in case, or take a battery clip good. not to worry about.