Zhejiang Fu sole Energy Technology Co., Ltd. specializes in producing and selling solar controllers, solar inverter, solar panel, battery, vehicle-mounted inverter, outdoor inverter, high-power inverter, modified sine wave and pure sine wave inverter, inverse control all-in-one machine, small solar power system, DC globe, DC lamp with line with switch, all kinds of photovoltaic connector, capacitors, etc. The products are exported to Middle East, Africa, Europe, America and other countries with reliable quality. Strive to provide consumers with high-quality high-tech products with high quality and low price.

Please read this manual carefully before using the product.

1, safety precautions 

(1) Please avoid flammable and explosive gases, corrosive gases, dust, etc. in the installation site.

(2) avoid installing the controller in direct sunlight or rain.

(3) do not insert any foreign matter into the chassis or sprinkle any liquid into the chassis.

(4) Please do not disassemble the controller or repair the controller by yourself.

(5) avoid placing metal objects near the battery.

(6) when the controller is working, please do not touch the terminal and bottom plate of the controller to prevent electric shock or scald.

2, product introduction

2.1 Product Overview

This series is a new generation of multifunctional and intelligent solar charger and discharger controller. The innovative structured design makes the installation and use of the controller safer and more reliable. The optimized charge and discharge management greatly improves the service life of the battery. Large at the same time LCD the display screen contains more abundant display content, the pattern is beautiful and easy to understand, and the simplified display Management maximizes the working status and corresponding parameters of the system. Various control parameters can be set to meet various application requirements.

2.2 function introduction

(1) intelligence PWM charging mode

(2) Vivid LCD graphic Display

(3) simple button operation

(4) charge and discharge control parameters can be set

(5) automatic temperature compensation

(6) automatic identification of battery voltage

Multiple load control modes

Lightning USB output interface

Battery low voltage, reverse connection, reverse discharge protection

3.1 installation steps

controller left up and down15cm the above space is conducive to better heat dissipation of the controller. The current density of the system wiring cable is controlled4A/mm2 within

(1) Select a suitable place and install the controller on the vertical surface.

(2) Check whether the battery voltage and solar cell module voltage are within the range required by the controller;

(3) Connect the battery and controller first. LCD the display is lit, such LCD if it is not lit, please press5.2 section processing;

(4) Connect the solar battery assembly. If there is a light controller, the battery will be charged, LCD the charging indicator arrow lights up;

(5) The connection load.

. 1 button

5, failure and maintenance

6. Technical parameters