Product size: 88*46*16mm

Net weight: 4.2 KG

Gross weight: 4.9 KG

Volume: 53 * 37.3 * 15.7 CM

A box: 50 / PS

Single weight: 77g

• Temperature measurement range:

•  Indoor: 10 ℃ to + 50 ℃ (+ 14 ℉ ~ + 122 ℉)

• Outside: - 50 ℃ ~ + 70 ℃ (58 ℉ ~ + 158 ℉) -

• Battery: 1.5v (AAA) x 

• Ø The basic function

   

• Indoor outdoor temperature (5 seconds automatic conversion)

   

• ℃ / ℉ temperature switch display () at the bottom of the battery cover

   

• Maximum/minimum temperature memory function

   

• 12/24 hour clock

   

• Clock and date display, time and date 5 seconds automatic conversion display

   

• Daily alarm clock/clock function

   

• The alarm clock light indicates the alarm

   

• The Features:

  * indoor & amp; Outdoor temperature display (5 seconds automatic switch display)

  * Memorized MAX/MIN values of indoor/outdoor temperature

  * Time & amp; Date display (5 seconds automatic switch display)

  * temperature unit ℃ / ℉ changeable

  * Clock with sound & Light alarm

  Temperature Range:

       Indoor: - 10 ℃ to 50 ℃ (+ 14 ℉ ~ + 122 ℉)

       Is suing: - 50 ℃ ~ 70 ℃ (58 ℉ ~ + 158 ℉) -

  The Product Dimension: 76 * 68 * 24 mm

  Power supply: 1.5 V (AAA) x 1

• Ø Operation method

  1. 1. Push the battery cover in the direction of the back direction of the machine, remove the battery compartment, and then install the battery cover, which can be used.
  2. 2. Key function:

  [MODE] switch the clock, alarm clock and date display MODE, set current time, alarm clock, 12/24 hour system, date;

  [1] the numerical value of the target;

  MAX/MIN displays the highest and lowest temperature values in memory, the highest and lowest temperature values to clear memory;

  ℃ / ℉ switch unit to ℃ temperature (c) or ℉ (Fahrenheit) display;

  [RESET] clears all Settings and memory values and returns the initial state.

  1. 3. In initial state press MODE for 2 seconds, 12/24 hour start flashing, press [ADJ] can select 12 hours or 24 hours. Continue to press [MODE, adjust the value and press (ADJ), repeat this operation, can respectively set up \"when\", \"points\", \"year\", \"month (M)\", \"day\" (D); The long press [the] button can speed up the numerical adjustment. Finally, press [MODE] to confirm the setting.
  2. 4. In the current clock MODE (clock and minutes between two flashing once per second) according to the MODE a, switch display for the alarm clock MODE (clock and minutes between two points is not flashing), according to [ADJ] can switch at this time \"alarm\" () function/(\" hour\" The function is open and close, and then hold [MODE] for 2 seconds to set the alarm time.
  3. 5. The alarm clock mode returns the current clock automatically after 10 seconds without any operation. At this time, the current clock is automatically returned after 10 seconds.
  4. 6. Press [MAX/MIN] to display the maximum temperature of memory (MAX) and MIN (MIN). Press [MAX/MIN] button, when [MAX] appears on the screen, hold MAX/MIN longer than 2 seconds to clear the maximum temperature of the memory; Once again, press the [MAX/MIN] button, the screen shows [MIN], and the minimum temperature of the memory can be cleared by holding [MAX/MIN] for more than 2 seconds.