Method of use:

1) matching products: first, please first open the remote control on the power switch, press remote live vibration, then mount receiver battery, (battery has bonus: in the factory packaging for remote control: high capacity batteries, 9 V when packing has been installed, receiver for: AAA 1.5 V regular alkaline batteries) on both sides. Please wait to receiver began to shake and make it vibrate more than 5 seconds. Only the remote control vibration release button. Meanwhile said receiver microcomputer has to accept and save from the remote control signal, the other remote control for it has no effect. If not, please try again. (please when buy operation)

2) please GaiPing receiver battery cover (because involving products are waterproof, be sure to install the battery cover ping), side out of thorns, stab at the top of the conductive adhesive, direct contact with the dog's skin. Fixed nylon ribbon collar, adjust good wear shoulds not be too loose or too tight, elastic should be can plug into two fingers under it.

3) remote control button function description:

On the left is the key: the key is direct discharge; Practical in a special emergency (e.g., your dog will hurt someone)

Lower left for the vibration button: this button is when your dog is not obedient, or yell, shakes the vocal cords of it, let it feel uncomfortable, when vibration is invalid for a long time, it will automatically be converted to discharge.

On the right is the luminescent key: the function of this key is to emit brighter white light, and use it at inconvenient times (e.g., go to the night road or the light is dark to find your pet, etc.).

 For voice at the lower right button: this button for your dog, you can follow one's inclinations Settings. Can adjust the size, and voice control switch on the right below. (such as: loud twice is on behalf of have a meal, quietly press again and again, on behalf of any other meaning, you can set your own training)

On the right side is the remote control switch. All the above operations must first open the switch.

4) to test whether the discharge method: this product, please don't direct contact with human skin test. We have throw in an LED in the packaging test lamp, will be two light foot fixed on the two discharge thorn, make sure have a good contact, and then press set key, LED lights flashing, said the product is discharge.

The user instructions

1)     Although this product have waterproof design, but please try to avoid flooding. So as not to affect the service life of the product. The remote control is not waterproof design, more must be waterproof. And don't fall off, so as to avoid the line loose. Affect product performance.

2)     This product is vibration + electric machine stop barking. Start, dog it is hard to shake the vocal cords, motor and stop the sound, so you must be a lot of training, when it call you press vibration punishment; When it stops, you can give some food as a reward, but please don't press the button to play with your pet. This is an inhumane behavior that will affect the training effect. Please remember!

3)     The remote control distance of this product is 250 meters, and the range is the signal interruption, which can not work. (250 meters is the straight distance of the unobstructed and non-signal interference.)

4)     When the product is not used for a long time, please take out the receiver's battery and switch off the remote control. It is better to remove the nylon ribbon collar and restore the factory status.

Preparation before use:

 Confirm that both the remote control and receiver are equipped with the battery.
Prepare some snacks for your dog. It's more effective.

< note: >.
After the first collar, there are some pets that can get upset and don't worry about getting used to it soon.
 

• The whistle and low-frequency vibrations of the receiver can be used to instruct the pet, and to instruct the pet in a fixed beat, it can understand the owner's intention and the perseverance is of great effect.

• Receiver of the high frequency vibration is used to prevent pet misconduct, each time can continue high frequency vibration time not too long (30 seconds) in order to avoid the receiver overheating damage to battery power and excessive consumption. Do not use high frequency vibration to play with pets.

Vibration key (high frequency/low frequency) different sound and state can be combined freely.
You can also use different beats to train your pet to receive instructions from the owner.
Each instruction must have a fixed beat, and stick to it, and it will work.
The high frequency vibration of the collar can stop pet misbehavior.