Instructions:
A: remove the glue from the etching.
In the solution, a few minutes of etching can be separated from the parts. After a few hours of immersion, the glue on the etch will dissolve.

B: modify the error bond.
Apply proper amount to the solution, cover it completely, wait 2-3 minutes for the glue to dissolve, then wipe with the cotton swab, and use the appropriate tool to remove the glue mark when necessary.

C: remove the glue trace on the plane
Take a suitable amount of glue solution drops on the cloth, a cloth scrub viscose surface, after a few seconds glue dissolve. If glue thicker, can repeat steps to completely remove.

D: the glue on the clothes.
Place the adhesive in the solution glue and soak for a few seconds, then wipe it with cloth. Repeat steps until completely removed.

(warm tip: this product is not easy to be harmful to most plastics or paints, but it should be used in small area to ensure safety.)

Save:

This product should be kept away from fire, heat source and direct sunlight.
Please seal it immediately after use and store in a cool and dry place. Below 25 ℃ storage shelf life: 24 months