Manufacturer Direct, Handcrafted, 3D Hot Fix Diamond Lettering, Badge Diamond Stitching
Ordering Contact Phone: 13515896845Or 13867962633
Address: 2nd Floor, Unit 1, Street 102102, 1st Street, 1st Block, 2nd Floor, East Gate, East Expansion Market, International Trade City, Yiwu City, Zhejiang Province
Product Usage Method:
The back of the glue net drill can be covered with double-sided tape or hot melt glue in two ways, and normally it is covered with hot melt glue. If you need double-sided tape, please contact the customer service personnel in advance. There are three methods for fixing: the first method requires heating the hot melt glue, which becomes sticky after melting. You can use a heat transfer machine, a pressing machine, or an iron to heat it. The temperature should be above 150 degrees, and it should be dry ironed without water. It should be pressed on the drill for about 15 seconds, and it can be fixed. You can also adjust the temperature or time according to the actual needs. If you are afraid of scalding, you can add a piece of cloth on the drill and heat it. The second method is if you are sewing clothes, wedding dresses, bags, shoes, or boxes, you can use sewing. Regular needles or fishline can be used~ Just pass through the glue layer~ The third method is for smooth surfaces such as mobile phones, laptops, shoe decorations, paper tubes, etc., you can use E6000 glue or AB glue to paste. If it is double-sided tape, just peel it and paste it.
