Strong Automotive Trailer Rope Hand Holding Rope Fluorescent Reflective 4 M 5 T Double-Layer Thickening/Trailer Belt for off-Road Vehicles

[Function introduction]]
◎ high-strength polyester: it is made of imported ribbon weaving machine once and produced through dyeing, high-temperature drying, ironing and other processes.
◎ reinforced casting hook with lock is more firm and safe, and can prevent iron hook falling off/breaking when Trailer (within rated tonnage).
◎ it is convenient for you to drag the car away from the anchor location.
◎ do not exceed the approved tonnage.

[Product features]]
1. The tow rope can prevent and reduce the vibration between the two cars when the trailer is processed by special technology.
2. The trailer rope is fluorescent, which is safer to use at night.
3. Forging with lock iron hook is more firm and safe, and can prevent iron hook from falling off during trailer.
4. It is convenient for you to drag the car away from the anchor location.
5. Do not exceed the approved tonnage.

[Precautions]]
1. It cannot be used beyond the specified load;
2. Do not drag on the rough surface;
3. It cannot be repaired at tow rope of structural damage;
4. The trailer should be slowly tightened and dragged, and cannot be dragged quickly;
5. Check frequently to ensure the normal use of tow rope.

[Abandon use]]
1. Corroded by acid or alkali;
2. Any part of trailer belt has melting, carbonization, and welding damage points;
3. Knot any part on trailer belt;
4. Deformation, holes, corrosion and damage to attached devices;
5. Have doubts about long-term use.

[Trailer tips]]
1. No matter what level of car, driving on the road will inevitably encounter problems. If the car breaks down on the road and cannot move forward, as long as it is not steering or brake system has a big problem, you can find a car to drag back first and then repair it.
2. Tie one end of the trailer rope to the front end of the rear axle steel plate of the front car, and the other end to the front of the rear car to hang below as close as possible to the center of the car. The two cars should be separated by more than a few meters. Fortunately, there is a handkerchief in the middle of the trailer rope as the identification sign.
3. When towing a trailer, experienced drivers should drive the car behind it, because the car behind it is difficult to control. If there is any negligence or improper operation, it may press the trailer rope or fail to bend and cause a collision accident.
4. When the trailer starts, because it bears the weight of a car, the front car must refuel more to increase the speed of the engine, then slowly relax the clutch pedal and let the rope tighten before starting. The speed should be well controlled while driving. Even if the road conditions are good, do not drive at high speed.
5. When the current car changes gear, the trailer rope will loosen accordingly. At this time, do not brake the dragged car. Otherwise, when the front car is refueling, the trailer rope will suddenly tighten and be impacted. Only when the rope falls on the ground can you step on the brake gently.
6. If the ramp is very long when going downhill, you can remove the rope and let the two cars slide down respectively, which is very safe; If the ramp is not long, you can hang the rope to go downhill, it is easy for the front car not to step on the brake, and then the car can step on the brake lightly to keep the rope tight all the time.
7. When you want to stop at the intersection, the front car will step on the brake a few times first, give the rear car a signal, then the rear car will step on the brake, and both cars will stop. When turning, you must pay attention to the big circle and tighten the rope as much as possible to prevent danger.