[Guke] Glue Gun Blue Switch 60W Hot Melt Adhesive Glue Gun

 1. Performance Features

1. This product uses high-tech ceramic PTC (Positive Temperature Coefficient) heat-sensitive resistors as the heating elements, which heat up quickly. PTC heat-sensitive resistors maintain a constant temperature, and once the heat reaches the design temperature of the glue gun, it will no longer rise, preventing damage to the glue gun caused by overheating of the heating element, saving energy consumption, and achieving the purpose of extending service life. 2. The electrical insulation strength of this product does not break down when powered on at 3750V/minute, and it can be used normally in AC or DC power sources between 110V and 240V. It is not limited by voltage fluctuations, and it is equipped with a built-in safety fuse for safer use.

Section Two: Product Applications

1. Toy models 2. Artificial flowers and Christmas trees. 3. Decorations, metal products. 4. Wooden products, cardboard, etc. 5. Electronic circuit boards.

Section 3: Usage Method

1. This series of products can be used for rubber strips with a diameter of 11-11.5 mm.

2. Insert the adhesive tape from the tail of the glue gun into the gun tube, and then plug in the power to preheat for 5-8 minutes. After that, pull the trigger to squeeze out the melted glue, and you can control the amount of glue.

3. During use, if a glue stick cannot be used in one go, do not remove it. You can plug it in and heat it for 5-8 minutes before using it again.