The real 3D printed moon lamp is not plastic injection, enameling, PVC!

Add WeChat 18267036118 chat two sentences, the price has surprise! Besides, our products are in stock! Have the spot!

We are a large professional moon lamp manufacturer!A lot of moon lights!Large quantity/urgent order/quick delivery! Support OEM customization.The product accessories are complete, unlike some manufacturers low - price less accessories less configuration.

How to choose products that meet your needs?

1. Determine the control mode (customizable) :

   Touch control refers to switching the color of the light or adjusting the brightness of the light by touching the charging hole

   \"Tap + touch\" means to switch the color of the light by tapping the product case or the touch charging hole

   Remote control + touch control refers to switching the color and brightness of the light by remote control or touching the charging hole

2. Determine the lighting color (customizable) :

   [double color] refers to a product with {yellow, white} two light colors

   [three colors] refers to a product with {yellow, white, warm white} or {yellow, white, seven colors gradient} three light colors

   \"Seven colors\" refers to a product with 7 colors (red, orange, yellow, green...) that can be switched within the product )

   16 colors means a product has 16 colors

3. Understand which parts the packaging contains:

   Neutral color printing gift box, with wooden support, Chinese and English instructions, charging line, and raffia paper buffer

Usage and precautions:

A,Click on the charging hole with your finger (no danger)Yellow light-The white light-Turn off the lightsIt goes around.

B,When the light is on (yellow or white), the brightness of the light can be adjusted by holding down the charging hole with the finger abdomen.

C,Charging voltage isDC 5 v,Mobile phone charger,The computerusbInterfaces and so on are available.

Notes:

1, the ball will turn red when it is charged.

2, because the installation circuit requires the ball edge will have the seam line (as shown in the figure).

3,The 3 dThe principle of printing forming causes contour lines on the surface of an object. The charging hole in the center is also a touch switch

The usage method:

A, click the charging hole with your finger (no danger) and cycle between the yellow light and the white light.

B, when you turn on the light, press the charging hole, with the fingers to adjust the brightness of the light.

C, charging voltage is dc-5v, mobile phone charger, and computer USB interface can be used.

Matters needing attention:

1, when charging, the ball becomes red, full, and then extinguished.

2, because the installation of the circuit required, the sphere edge will have seam.

3. 3D printing causes the object surface to have the contour line phenomenon. 

Contact trichrome product overview:Yellow and warm white three color, touch switch, adjustable light, built-in lithium battery, color printing, gift box packaging, wooden support and instruction for use in both English and Chinese, the charging line, lafite buffer, provide color printing paper neutral packing.

Touch control color gradient products overview:Yellow and colorful gradient three colors, touch switch, adjustable light, built-in lithium battery, color printing, gift box packaging, with a wooden support and instruction for use in both English and Chinese, the charging line, lafite buffer, provide color printing paper neutral packing.