B7000 special needle glue for drill sticking

Specification: 15 ml / 25 ml / 50 ml / 110 ml 

【Scope of applicationFully transparent imported rubber, size and specifications, blister packaging, easy to ship and transport, easy to crush, qualityThe needle design is easy to operate and applied to all walks of life. It is suitable for the DIY repair of crystal beads bonding watch accessories, headgear and mobile phone shell, etc., and the unique pinhole design can be operated accurately even in the complex and small parts

【 property 】This kind of glue is environmentally friendly, transparent and does not hurt the material.

\"Advantages\"Superior quality of glue, high environmental protection package, beautiful and convenient operation

Typical features and USES: 1. Auger professional bonding 2. Repair ceramic and wood figurine 3. Replace pieces 4 on broken cups. Assembly handicraft design 5. Repair yard and garden statues 6. Repair cracks and cracks in wooden frames 7. Reconstructing the damaged edge Angle 8. Fill nail holes and drill holes 9. Adhesion of ceramics to wood or to metal to concrete 10. Can be used in busy traffic areas, as contact surface protection. 11. Good acid and alkali resistance, which can be used as protection coating for corrosion resistance in acid and alkali environment (such as salt water or sulfuric acid). 12. Insulation property: excellent dielectric insulation and resistance resistance, suitable for electronic equipment. 13. Non-flammable. 14. Others: high impact resistance and will not deflate, burst or solidify during molding. Once solidified, it can be polished, ground, filled, hammered, cut and drilled, and most paint can be swept. Can be molded into any shape to replace small pieces that are damaged or missing. It can be constructed with elevation and vertical plane, without vertical flow. Easy to blend with color, with powder colouring, most water-based colouring and food dyes.

[B7000 technical data]

Appearance: transparent semi-mobile body

Solid content: 28%-35%

Hardness after curing: 65-80a

Surface drying time: about 3-6 minutes

Full curing time: 24-48 hours

Colloidal: fully transparent flexible colloidal semiconductor

Features: no white, no crispy, no yellow, no hard, very small smell

Save: save at 10 to 30 degrees

Concentration comparison: 

B - 6000 (6000 CPS)

B - 7000 (7000 CPS) 

E 8000 (2500CPS)

Usage and precautions 

Read the instruction before use. It can only be used in a well-ventilated environment. Bonding surface should be clean, dry, no dust, rough up the surface before use to ensure that the adhesive strength, can be used between 10 ℃ to 32 ℃, the temperature in 21 ℃ to 29 ℃ between effect is good, after curing is the scope of this glue can withstand temperature - 40 ℃ to 66 ℃, formal do small area test before use.

2. Apply it directly on the surface to be glued, and press it firmly. After about two minutes, it will start to thicken and solidify in 10 minutes. Curing time will be prolonged when the temperature is low and shortened when the temperature is high. The curing time can be accelerated by using the hand-held hairdryer. The curing time should be set at low temperature, not directly facing the versatile adhesive.

Remove wet glue with acetone or turpentine. The solidified material can be removed or scraped off with a tool.

If you use this versatile adhesive for bonding fabric, do not dry clean the fabric.

This versatile adhesive is not recommended for adhesion of styrofoam, polystyrene, polystyrene, polypropylene plastics.

Storage: freeze/thaw at 10 to 27 degrees: let the product reach room temperature before opening the lid

Product picture reference

Glue package specification picture

15ml: 100 pieces/box, 1200 pieces/box

25ml: 50 pieces/box, 600 pieces/box

50ml: 15 pieces/box, 360 pieces/box

110ml: 12 pieces/box 120 pieces/box

Production equipment corner