car led light chassis lights car bottom light remote control colorful light voice control modification flash colorful night light

Product Name: 1-4 Wireless Remote Control Car Music Underbody Light Kit - 7-Color Underbody Lights

Product Description: This price is for the complete set. You can install it directly upon purchase.

A set of one-pull four-color remote control undercarriage lights suitable for installation on various cars, equipped with a remote control to control all functions.

Voice-activated high-brightness LED. High-quality waterproof base lamp. Wireless remote control base lamp.

1) The material for the shell is PVC, which can be bent easily, resistant to high and low temperatures, and water-resistant!
2) Remote Control Operation Instructions:

C key: Wireless remote control power switch - Cycle operation

B key: Color-changing flash mode with 7 lighting colors and 6 flash patterns. Cycle operation for selection.

D key: Direct selection of rainbow gradient, seven-color light automatically cycles through flashing functions.

A key: Voice control function

3) Can be connected to the brake or door switch power supply (single red), when stepping on the brake or opening the door, this light will be lit as a warning light.

4) This product uses LED as the light source, which is energy-saving and power-saving. Working voltage: 10V-15V. Maximum power: 12W.

Characteristics:

2) Waterproof rating of IP68, suitable for indoor and outdoor use.

3) DC12V voltage

4) Strong and high seismic resistance

5) Low energy consumption, high brightness

6) No radiation

7) Flexible and compact size, easy to install

8) Service Life: 10,000 hours

9) Easy to install, can be installed inside or outside the vehicle.

Installation location: Can be installed on the bumper, the air intake grille, the cabin, the rear, and the vehicle bottom.Installation Method:

1. Fix the light strip to the appropriate positions on the front, back, left, and right of the vehicle's undercarriage (or inside the vehicle if necessary). Then, connect each lead wire to the main control box separately using standard connectors.

2, connect the main switch box red and black wires to the positive and negative terminals of the car battery (the power supply for the turn signal can also be used), and connect the single red wire to the brake power supply or the door switch power supply.

3, try switching on and off the power and flashing mode using the remote control. If pressing the remote control does not work and the indicator light is on, please check if the main control box's receiving antenna is suspended or turn on the main control box's power again.