Product Name: x3-6000LM series headlight
Product Introduction: the lights on the lighting Road when the vehicle is driving on a rainy and foggy day can improve the visibility of the driver and the surrounding traffic participants, so that vehicles and pedestrians can find each other in a distance. Lossless installation,

The size is the same as the original car light. No need to change the line, no need to break the dust cover. Two years warranty. The spotlight type can be adjusted 360 degrees. Spotlight, irradiation distance is far.
Product Parameters: Power: 50W single
Light Source: SEOUL-SZ8-Y19
Operating voltage: wide voltage DC 8-32V
Protection level: IP 68
Color temperature: 6000K
Material: 6063 aviation aluminum + copper
Heat dissipation principle: turbine heat dissipation
Luminous flux: 6000LM
Working life: ≥ 30000 hours
Working temperature:-40℃ ~ + 80℃
luminous flux :140LM/W
Operating voltage: DC 8-32V. (Large trucks, small trucks, cars can be used and installed)
Luminous color: white light, gold light (other colors contact customer service)
Light angle: 360 °
Environmental protection: it does not contain lead, mercury and other elements, can be safely touched, has no pollution to the environment, and has no damage to the car!
No radiation: no ultraviolet rays and infrared rays in the spectrum, no harm to the human body.
Fast response: no need for hot start time, it can start in microseconds.
Strong stability: anti-vibration, impact resistance, safe and reliable
Warm Tip: high-end models with light detection function such as Mercedes-Benz, Magotan, BMW, Audi and other high-end models may light up the faulty light after installation. If you are not sure whether the original car has a headlight detection function,

Just take the light bulb of the original car, if the trouble-free light on the instrument panel indicates that there is no light detection function! (This product is suitable for 99% models on the market and will not report defect code)
Install caution: when installing the fog lamp, Please aim at card slot the gap and tighten it with one screw! Do not install with brute force! In order to avoid the phenomenon that the internal broken stitches does not light up due to the movement of the lamp body!
Installation guidance: no need to make any changes to the original car circuit, directly replace the original car bulb