Product features

● High-quality image HD FULL HD 1080P DV DC

155 degrees wide Angle lens

● Compact shape design, portable handheld DV DC

● At low illumination, high - definition video can be recorded

● The format video is: 1280 by 720

● Video format: 1920 x 1080

● Photo mode: 12M (4032 x 3024)

● Motion detection video: 720P and 1080

● High-speed USB 2.0 port

● Maximum support for 32G - not T-flash

● Support tv-out connection to TV monitor video

● The built-in lithium battery lasts for up to 60 points

Operational guidelines for school official cites use

Charging:

    The machine is equipped with a rechargeable lithium battery. When the machine is used for the first time, please charge it first. It can be charged in the following ways:

       1 Connect the computer to charge, use USB to connect with the computer

       2 Record while charging, either recording or charging (external USB 5V charger or mobile power supply)

       3 The red light will flash and blue light will not go on while charging. The full charge red light will be long and blue light will not go on (after the red light is long, please charge it for another 30 minutes or so to make sure the battery is 100% full).

Note: 1. When the battery power is low, the DV red and blue light will flash for 5 seconds and then turn off and enter the protection state 

        (record file save and automatic shutdown), please charge the machine at this time.

      2 Power on without card, red and blue lights flash at the same time for 5 seconds and then automatically shut down.     

      3 No working mode after power on, 1 minute automatic shutdown.

First-line three application:

    USB cable TV cable synthesizes a line, has the following three functions

      1 It can be plugged into computer to charge and transmit data.

      2 You can plug in the TV OUT screen display.

      3 You can plug in the dv-5v external side while recording.

720P video flash:

   Click ON OFF button to boot, boot blue lights long as the standby mode, click the switch button, under the blue lights flash 3 after the lights went out into the 720 p video, video lamp is not prompt, in the process of continuous recording a segmented automatically save 5 minutes, circulation coverage, click switch machine button again to stop video, back to the blue light blue light long ON standby mode.

1080P video flash:

   Boot blue light long on standby mode, press the mode button, red and blue lights long for 1080 p mode, click the switch machine button once again, blue light red light flashing three times on the long put out at the same time, entering the 1080 p video recording, video recording lamp is not prompt, in the process of continuous recording a segmented automatically save 5 minutes, circulation coverage, then click on the key switch machine 1 time to stop the video, to return to standby mode.

Take 12 million photos:

   Press the button in standby mode for 2 times. The red light is long and the blue light is not on. Press the button again.

Open and close infrared lamp:

   Turn ON: in any mode, press ON/OFF button for 2 seconds or so, the red light flashes for 2 seconds, and the infrared night vision lamp is turned ON, enabling night vision video recording.

   Turn OFF: turn OFF the infrared night vision light. In any standby mode, press ON/OFF button for 2 seconds or so and the red light flashes 3 times. Turn OFF the infrared night vision function.

Motion detection mode (720p-1080p) :

   720 p motion detecting: in blue light standby mode, press mode key for 3 seconds, red light flashing on the long 3 under blue lights lamp open motion detecting video mode, both have detected objects move after, red and blue lights flash for 720 p motion detecting video at the same time, a period of five minutes, automatic packaging preservation, circulation coverage, no object mobile standby all the time without electricity or TF card record. (click any key once to exit the motion detection mode).

   1080 p motion detecting: in the long red and blue lights on 1080 p video mode, long press the mode button for 3 seconds under the red light flash 3, red light flashing on the blue light long after 3 under the open motion detecting video mode, both have detected objects move after, red and blue lights flash for 1080 p motion detecting video at the same time, a period of five minutes, automatic packaging preservation, circulation coverage, no object mobile standby all the time without electricity or TF card record. (click any key once to exit the motion detection mode).

Recording while filling:

   Plug in the TF card, plug in the usb-tv cable externally, plug in the USB power supply or the charger (mobile power supply) machine with the external 5V directly into the 720P camera mode without manually stopping recording until the card is full or no power is available, or you can manually stop recording to switch to any mode.

TV OUT mode:

   Connect the usb-tv cable. When you power on the TV, you can see the image through the TV screen. At this time, you can take photos, record videos and use mobile detection.

Reset:

   When the machine crashes, the button is invalid and cannot be used normally. You can use pointed object to insert the button into the reset hole to reset the machine. After reset, it can be used normally.

Shutdown:

   In the stop (video recording, photographing and motion detection) function mode, it needs to be turned OFF. Long press ON/OFF button for about 6 seconds, and it is found that all red and blue lights are turned OFF. In standby mode without using any function, standby automatically shut down for 1 minute.

Change Settings at your own time:

     After the machine starts automatically in TF kagan directory to create a TXT text documents (pictured), shutdown to connect the computer with usb data cable, opens in the removable disk TIMEREST. TXT text document, edit your the time it takes for example format (minutes) when (date) (month) (year) after 20160804174726 Y save text files, boot record video, video file will be displayed above the editor of the time. It doesn't take time to watermark the same way, mainly the letter difference of Y and N at the end. The reference format is as follows:

       1: Y (time watermark display)

       2: N (no time for watermark display)

Note:

  Please be sure to confirm that a t-flash (Micro SD) card has been inserted into the product. If the card is not inserted, the machine red and blue light double flash can not be used normally.

  Please aim the lens at the target in a well-lit environment and keep a distance of more than 50cm from the target. In this way, you will get a correct image with natural colors, clear scenes and stable images.

Connect to the computer:

   In the state of startup, standby and shutdown, you can directly connect to the computer. After connecting to the computer, you can use it as a U disk, and you can freely copy, cut and paste, delete, and format the U disk.

   Connect the machine to the computer's USB port. In a few seconds, the computer will pop up a movable disk. The blue light identifies the USB device to transmit data.

Tip:

   After connecting to the computer, if the computer cannot recognize it, or the removable disk does not pop up after 30 seconds, please reset and plug it again.

   2 it is recommended to use TF card reader to directly read video files for playback, and use USB connection to directly play the video files stored in the machine's built-in memory, which may cause poor playback due to the large amount of data, failing to catch up with the transmission.

Related parameters

Note: after each use of the battery, the battery should be recharged for about 2 to 3 hours before it can be fully charged. After the indicator light is full, it should be recharged for as much as 30 minutes to ensure that the battery is fully charged.

      As this product is a real HD high clear DV, the power consumption of the product is greater than that of general cleaning, the shell material is made of zinc alloy, while the product may have some heating status, which is normal. Please do not worry about the product's defects. This product is shipped after a long time of testing and aging to ensure that the product has no quality problems.

Matters needing attention:

Usage: please strictly abide by the relevant laws of the country where you are using the product.

Operating temperature: please use in natural temperature, do not use in the temperature that human body cannot adapt to.

Working humidity: please use the product under the human suitable environment humidity. Do not put the product in the humid working environment. This product does not have the waterproof function.

Shooting requirements: please use in the environment with sufficient light source, do not direct the camera to the sun and other strong light source, so as to avoid damage to optical devices.

Cleaning requirements: do not use in an environment with excessive dust density, so as to avoid dust on the lens and other parts and affect the camera effect.