Outdoor vehicle household electric pump ht-202 filling and pumping dual purpose household 220V and vehicle 12V electric

型    Number: HT - 202.

规    Lattice: 10.0 x 9.7 x 12.5 cm

Package size: 12.6 x 10.5 x 14 cm

功  Energy: it can be used to inflate or vent air, and it has three different sizes of air outlets, which can fill swimming pools, floating beds, inflatable boats, mattresses, etc.

Automotive line 7:1 m

Power: 40 w

Rated pressure: 5000pa - 6000pa

净   Weight: 0.58 KG

毛  Weight: 0.7 KG

包   Packaging: color box packaging

Standard certification: German CE

Accessories: specification, air pump, three air charging heads (optional according to the size of the filling hole), one vehicle plug (12V) and one household plug (220V).

Scope of application: inflatable bed/floating bed/inflatable sofa/inflatable sink/cotton bed/swimming ring etc

Matters needing attention:

This is an efficient air pump. This pump is used for aerating airships, air mattresses, etc.

Prevent children from approaching the air pump.

Do not plug the air vent and vent to avoid obstructing ventilation and affecting the work of the air pump.

Air pump should be adjusted according to the size of the filling valve to shorten the working time of the air pump.

To inflate:

The air is fed into a 12V volt cigarette lighter.

When filling the air, the air charging port is connected with the interface and the air nozzle, then the filling valve is inserted, the starting switch is pressed to start filling the air, and the stop switch is pressed after the end. (\" - \"means on,\" O \"means off)

When inflating the air, special attention should be paid to the filling valve of the required air filling products can not be blocked to avoid overheating of the air pump caused damage.

Exhaust cover is forbidden when air is deflated. For large inflating vessel or air bed, the pump should be directly inflated to its filling valve to speed up the filling speed. However, for the filling valve of small inflating product, proper air nozzle should be used.

 When the exhaust:

Air inlet opens the filling valve to vent air

Connect vent cover to vent when air vent is done, connect air vent directly and then insert the filling valve, press the start switch to vent, and then press the stop switch.

When starting exhaust, special attention should be paid to the filling valve of the product which needs to be filled, so as to avoid damage caused by overheating of the air pump.

For very small filling valves, hold the thin section of the filling valve with your fingers and open to allow air to circulate.

If the screw air nozzle is required to be inflated rapidly, the safety plug can be opened first, and the safety plug can be directly inflated by the safety plug mouth. After filling, the safety plug is locked, and then the safety plug can be directly inflated by the upper cover mouth. When exhaust, open the safety plug to exhaust directly

型    Number: HT - 202.

规    Lattice: 10.0 x 9.7 x 12.5 cm

Package size: 12.6 x 10.5 x 14 cm

功  Energy: it can be used to inflate or vent air, and it has three different sizes of air outlets, which can fill swimming pools, floating beds, inflatable boats, mattresses, etc.

Automotive line 7:1 m

Power: 40 w

Rated pressure: 5000pa - 6000pa

净   Weight: 0.58 KG

毛  Weight: 0.7 KG

包   Packaging: color box packaging

Standard certification: German CE

Accessories: specification, air pump, three air charging heads (optional according to the size of the filling hole), one vehicle plug (12V) and one household plug (220V).

Scope of application: inflatable bed/floating bed/inflatable sofa/inflatable sink/cotton bed/swimming ring etc

Matters needing attention:

This is an efficient air pump. This pump is used for aerating airships, air mattresses, etc.

Prevent children from approaching the air pump.

Do not plug the air vent and vent to avoid obstructing ventilation and affecting the work of the air pump.

Air pump should be adjusted according to the size of the filling valve to shorten the working time of the air pump.

To inflate:

The air is fed into a 12V volt cigarette lighter.

When filling the air, the air charging port is connected with the interface and the air nozzle, then the filling valve is inserted, the starting switch is pressed to start filling the air, and the stop switch is pressed after the end. (\" - \"means on,\" O \"means off)

When inflating the air, special attention should be paid to the filling valve of the required air filling products can not be blocked to avoid overheating of the air pump caused damage.

Exhaust cover is forbidden when air is deflated. For large inflating vessel or air bed, the pump should be directly inflated to its filling valve to speed up the filling speed. However, for the filling valve of small inflating product, proper air nozzle should be used.

 When the exhaust:

Air inlet opens the filling valve to vent air

Connect vent cover to vent when air vent is done, connect air vent directly and then insert the filling valve, press the start switch to vent, and then press the stop switch.

When starting exhaust, special attention should be paid to the filling valve of the product which needs to be filled, so as to avoid damage caused by overheating of the air pump.

For very small filling valves, hold the thin section of the filling valve with your fingers and open to allow air to circulate.

If the screw air nozzle is required to be inflated rapidly, the safety plug can be opened first, and the safety plug can be directly inflated by the safety plug mouth. After filling, the safety plug is locked, and then the safety plug can be directly inflated by the upper cover mouth. When exhaust, open the safety plug to exhaust directly