Soft adhesive instant superglue 502 glue repair travel shoe leather shoes glue

Scope of application:

Metal, rubber, plastic, electronic components, jewelry, electrical components, etc.

Usage:

1. Clean the following surface first, remove the dust, oil, rust, etc., and then grind the metal first. For plastics such as PE, PP or PTEE, the surface should be activated first.

2. Open the front cover and tap the tip with your fingers, leaving no residual liquid, then cut the hole with scissors.

3. Put a small drop of the reagent on the followed surface, and immediately continue the reagent until hardening. The next area should not be too large, and the next layer thickness should not exceed 0.2mm.

4. Wipe the container after use and put the lid on. Store in a cool and dry place or refrigerate.

Matters needing attention:

1. The vapors of this adhesive will stimulate mucous membranes and eyes.

2. Avoid contact with skin and eyes. If accidental, wash with plenty of water and send to doctor immediately.

3. Wash hands with soap, water, cleaning solution and pumice stone when touching them.

Shelf life: 12 months (20 ℃)