Auto shear jack car hand jack emergency tools and supplies

Lifting weight: 2T

Minimum height: 90mm

Lifting height: 295mm

Maximum lifting height: 385mm

Baby weight: 2.4kg

Package size: length 42.5cm* width 10.5cm* height 9.5cm(1-2 cm measurement error)

(suitable for general cars, such as santana, buick, etc.)

The product through the manual operation of the screw rotation movement into the arm of the lifting movement, with a compact structure, easy to operate, safe use and other characteristics, so widely used in cars, pickups, light vehicles and other vehicles with the necessary tools!

Can be carried with the car, small and convenient. Especially frequent business trips, travel, long - distance car essential. In case of need to change the tire or repair the tire, you can use it at any time. Easy to operate. A few handshakes will lift the car.

This manual jack is made of steel. No matter its strength or fastness, it is incomparable with other materials. And the operation is simple, cheap and fine, worth a set.

Usage and precautions

1. Park the vehicle on a level hard road before lifting, pull on the hand brake and block the wheel, and open the danger warning sign.

2. Stop the wheel on the slanting side of the tire and loosen the nut of the replacement wheel, but do not unscrew it.

3. Insert the handle into the screw jack, and then jack the handle clockwise to the appropriate height.

4. Put the jack under the jacking position specified by the automobile factory, turn the handle clockwise to make contact between the jack saddle and the jacking position, and check whether the contact is safe and reliable

5. Then, lift the vehicle to the right height by shaking the handle, change the tire and tighten the pre-nut.

Notice: when using the jack to support the vehicle, it is strictly prohibited to work under the vehicle! Must use the safety bracket support, can enter the vehicle bottom work.

Notice: jack must not overload use!

Note: in order to ensure the normal use of the jack, please keep the screw pair of the jack clean and lubricated.

[usage]
1. Park the vehicle on a level hard road before lifting, pull on the hand brake and block the wheel, and open the danger warning sign.
2. Stop the wheel on the slanting side of the tire and loosen the nut of the replacement wheel, but do not unscrew it.
3. Insert the handle into the screw jack, and then jack the handle clockwise to the appropriate height.
4. Put the jack under the jacking position specified by the automobile factory, turn the handle clockwise to make contact between the jack saddle and the jacking position, and check whether the contact is safe and reliable
5. Then, lift the vehicle to the right height by shaking the handle, change the tire and tighten the pre-nut.
[matters needing attention]
1. When supporting the vehicle with a jack, it is strictly prohibited to work under the vehicle! Must use the safety bracket support, can enter the vehicle bottom work.
2, jack must not overload use!