Use methods and advices

1. Before lifting, stop the vehicle on a horizontal hard road, pull handbrake and stop the wheels, and open the danger warning sign. 2. Stop the wheel on the opposite side of the replacement tire and loosen the nut of the replacement wheel, but do not unscrew it.

3. Put the handle sleeve into the screw socket and shake the handle clockwise to the appropriate height.

4. Place the Jack under the lifting position specified by the automobile factory, turn the handle clockwise to make the Jack saddle contact with the lifting part, and check whether the contact is safe and reliable.

5. Then, shake the handle to lift the vehicle to the appropriate height, replace the tire and preload the nut.

★Note: When using a jack to support the vehicle, it is forbidden to enter the underbody of the vehicle! You must use security support before you can enter the underbody operation.

★Note: Do not overload the Jack!

★Note: to ensure the normal use of this Jack, please keep the screw pair of the Jack clean and lubricated.