Easy to use, strong adhesion, extensive adhesion materials, can be used in iron and steel, non-ferrous metals, rubber, leather, plastic, ceramics, glass, wood, etc.

But for polyethylene, polypropylene, polytetrafluoroethylene products, the material surface needs special treatment. Widely used in electrical appliances, instruments, machinery, electronics,

Light instrument, medical treatment, light industry and civilian wait for an industry.

Usage:

1, first clean the next surface, remove the dust, oil, rust, etc., then on the metal, it is best to first rough, PE, PP or PTEE and other plastic, should first make the surface activated.

2. Open the front cover and gently buckle the tip with fingers to leave no residual liquid, and then cut out the holes with scissors.

3. Drop a small drop of the adhesive on the surface to be followed, immediately follow up, and maintain until the hardening, then the area should not be too large, then the layer thickness should not be more than 0.2mm.

4. Wipe the container after use and put the lid on. Store in a cool and dry place or refrigerate.

Matters needing attention

1. The vapor of the adhesive may cause irritation to the mucous membrane and eyes.

2. Avoid contact with skin and eyes. In case of accident, wash with plenty of water immediately and send to the doctor.

3, touch the hand, can be soap, water, detergent and pumice wash.

Storage: 20 ℃ below 3-12 months.

Shelf life: 360 days (1 year)