New Model Photoconductive Portrait Stamp Machine Stamp Engraving Machine Personalized Stamp Machine DIY Wedding Cartoon Stamp Machine Photoconductive Machine

Inkstone material
Stamp shell, photocopying ink pad, photocopying ink, sulfite paper/printing film, exposure film.

Photocopy seal production process:

1) Print the prepared proofs on acid paper or film using a laser printer.

2) Cover the transparent exposure film according to the sample specification, ensuring that it is large enough to completely cover the sample.

3） Open the internal light-sensitive device exposure box, put the light-sensitive stamp pad (if you need to expose a new stamp shell, remove the handle and cover of the stamp shell, take out the transparent organic board at the bottom of the exposure box, and put the stamp pad in the direction into the exposure box), the exposure film, and the printout. The order and orientation of the printout, exposure film, and light-sensitive stamp pad are: the bottom layer is the light-sensitive stamp pad, the middle layer is the exposure film, and the printout is on the top layer, with the print side facing down. The three should be in contact with each other smoothly and tightly, with no gaps or folds in the middle. Press the light-sensitive device exposure box board tightly, and put it into the light-sensitive stamp machine.

4) Turn on the power and open the power switch, and the photocell begins charging.

5) There are various types of photocopying stamp pads, and different pads require different exposure energies. In order to accurately expose all photocopying stamp pads, this machine adopts an exposure method that can freely and randomly expose according to the voltage display on the meter. The exposure voltage range is from 160V to 320V, which can be exposed. (For the first time, it is recommended that users test the best exposure voltage value for the pad with scraps. For example, the exposure voltage value for some domestic photocopying pads: sulfite paper print draft 280V + 5%, film print draft 260V + 5%). When the photocopying machine is charged to the required exposure voltage for the pad, turn off the power, press the trigger button, and complete the exposure.

6) Remove the exposure box from the machine, open the exposure box, take out the exposed stamp pad, remove the sulfuric acid paper/print film and the exposure film.

7) Place the exposed stamp pad into the stamp shell, and inject the correct amount of ink according to the stamp specification. After the ink is fully absorbed, it can be delivered to the customer for use.

Application scope:
1. Make cartoon stamps.
2. Shop product packaging stamp.
3、Wedding Seal;
4、Birthday Stamp Gift Stamp;
5. Portrait Seal
6、Image stamp;
7. Various DIY Stamp Designs