Method of operation of vacuum cupping apparatus
Vacuum cupping - operation method of use: selection of proper size of tank and comfortable postures, will choose good can have on the top of the piston, to ensure that the ventilation, vacuum gun and gently set after living with tank at the top of the piston, vertical lift lever several times, quickly to cupping uplift skin, the patient can tolerate for degrees, adsorbed on the surface, can have the negative pressure around the muzzle gently turn toward the back, gently press the pot piston to prevent leakage; Lift the top piston at the end of use for 10 minutes at a time. Connectors can be used in areas (such as the spine, waist) where a single person cannot be cupped directly.
1. Select acupoints according to the condition. Refer to the acupoints marked in the acupoint selection diagram when using. Other acupuncture points are arranged symmetrically. Only one side is marked in the chart. Bilateral acupoints should be taken in use. When selecting acupoints, the acupoints listed in the acupoints can be divided into two groups by reference.
2. Select appropriate canister and comfortable body position (can be divided into sitting position, supine position, side position and tummy position).
3. Lift the piston on the top of the selected tank to ensure ventilation.
4. After the nozzle of the negative pressure gun is gently groped onto the piston on the top of the can, the vertical and rapid rod is lifted several times until the skin is raised in the cupping, which can be tolerated by the patient.
5. Connectors can be used in places where direct cupping is not possible (such as the spine and waist). Method of connector installation: first connect the big end of the connecting rod at one end to the big hole of the spare front mouth, and then connect the small end of the connecting rod at the other end to the muzzle of the negative pressure gun to make it a whole body. Then the front mouth and the piston head of the cupping can are put together, and then the cupping can is placed on the part that needs to be used.
6. After the tank is adsorbed on the body surface, turn the nozzle of the negative pressure gun back slightly and gently press the piston of the tank to prevent air leakage.
7. Just lift the piston at the end of use.
8. Use disinfectant and alcohol cotton after cupping. Do not soak, boil or high temperature treatment.
9. If the cupping cannot be removed, please check whether the rubber plug in the cupping is tightly sealed, whether the connection between the negative pressure gun and the cupping gun is too tight, whether the negative pressure gun and the cupping gun are vertical, and whether the pressure on the skin is too high when the negative pressure gun and the cupping are being pulled.


Cupping pigment is reflected as follows (different people, different people cupping color depth will be different) :
1, black purple and dark: generally speaking, blood supply is insufficient, there is blood stasis phenomenon.
2, can print hair purple and accompanied by plaque: generally expressed cold coagulation and blood stasis.
3, pot print is scattered in the purple dot shape, and the depth of a, said qi stagnation blood stasis.
4, pot printing bright red and yan: generally speaking, Yin deficiency, qi and blood deficiency or Yin deficiency fire flourishing.
5, pot printing red and dark: high blood fat, and there is heat evil.
6, can printing gray, touch but not warm, for the cold or damp evil.
7. Skin marks or slight itching on the surface of pot marks: indicating wind or dampness.
8. Water vapor on the inner wall of the tank: indicates that there is moisture in this part.
9, pot marks blisters, indicating that the body is heavy moisture, if there is blood and water in the blisters, is the reaction of heat and humidity.