Step one: First determine where you want your wall stickers to be installed, and then clean up the walls to make them clean and tidy. Do not post on freshly painted or damp walls. Wait patiently for drying before Posting.

Step 2:When installing the first wall sticker, find the reference line and be sure to align the horizontal lines so that the rest of the installation will benefit. Please be patient. The more you post, the better. When you want to remove the wall paste from the backing paper, it should be lifted from all four corners. Attach the exposed part to the wall. At the same time, hold down the part that has been glued, continue to slowly peel off the remaining bottom paper, while peeling at the same time, press the wall paste, until the whole bottom paper falls off, the first piece is installed

Step 3: For the second wall sticker and the rest of the product, overlap the edges based on the interface of the previous one. Each wall sticker has its own interface, and each installation leaves an interface that overlaps the next wall sticker. You cannot install the product without a docking port.

Step four:When meeting a corner or docking from one side of the wall to the other side, the wall paste cannot be folded. Please measure the distance between the last wall paste and the corner and cut out the appropriate size for installation.

Step 5:Use a sharp knife to cut through the ruler. In the overlap interface, can be a strong pressure for installation. When installing to the corner, also need to press hard.

Step 6:More importantly, transferability: after the sticker is pasted on the glass or flat surface, when the surface is peeled off again, no glue remains on the surface or the glue is damaged; And the sticker can be effectively pasted again. However, if there is no special reason to paste repeatedly so as not to affect the wall paste effect.