Light Stick Type Hot Wheels Bicycle Tire Valve Core LED Light Valve Light Cycling Fixture

• Each batch of goods is different, the transfer buckle is sometimes black, sometimes silver, no special instructions, random delivery
• Air valve light is a low-cost electronic product. It is inevitable that it will not be bright during transportation. It has a certain rate of bad products and will not be replaced and refunded. Please choose carefully when purchasing. 2-5 of the 100 products are expected.
• The outer skin color is shown in the following figure: pink, blue, green and yellow
• Unified blue light
• Skin color: pink  yellow  green  blue
• Luminous Color: contrast light, pink pink light, yellow yellow light, green light, blue blue light 
• Packing size: 42.5*33*50.5
• Packing number: 500 cards/1000

Skin color: pink, yellow, blue, green

        Four outer skin colors all send blue light

Carton size: 50.5*33*42.5 (1000 pieces per piece)

Double card packaging, the price is single price

Each batch of goods is different, the transfer buckle is sometimes black, sometimes silver, not special

Yi Shuo ming, random delivery, please pay attention before ordering

Wholesale price of this product, no after-sales service or reshipment, please pay attention before ordering, please consider carefully before ordering

Name: light stick type Hot Wheels air valve light
Power supply: three AG-10 batteries

Color: Pink Yellow Blue Green

[Precautions]]
1, battery installation must be positive and down (the side with words is positive).
2, it is normal that the circuit board inside the lamp holder is loose. Be careful not to let the circuit board fall when removing the lamp holder!
3,  this hot wheel comes with adapter suitable for British valve and American valve who need to install French air nozzle

If you receive the chemical, you must first take out the insulation paper inside/the positive and negative poles of the battery. Do not reverse it/It will light up only when the vibration occurs.

• When installing the battery, the positive pole must be downward (the side with words is the positive pole). Do not remove the insulating transparent plastic sheet inside the lamp shell, which is used to prevent the short circuit between the battery and the metal of the lamp shell, otherwise, the metal short circuit between the battery and the lamp shell will cause the battery to discharge and heat up, and the battery will run out of power in a few minutes. It is normal that the circuit board inside the second lamp holder is loose. Be careful not to let the circuit board fall when removing the lamp holder!