Construction procedure

In order to ensure theThe quality of the product, it is recommended that the surface should be cleaned without dust or grease before use. No standing water or moisture; At the same time to ensure that one side is absorbent material and firm, to ensure that the paste effect.

1) Cut the nozzle above the thread line to achieve the desired size and Angle (about 6mm);

2) Extrude one or two consecutive strips from the back to be pasted.

3) Bond the materials to be pasted for at least 2 minutes;

4) Wipe the spilled glue solution with a wet cloth;

5) Depending on the base layer, certain supports or fixations are needed when bonding heavy objects.

The rubber strip with a width of 6mm can be used for sizing 10m.

Bonding time and strength: the final strength can be reached after 48 hours, but may change according to the actual situation;

Restrictions: Do not use in wet and stagnant areas. Do not use in installing mirrors. Materials can be used in POLYvinyl chloride; But not for polyethylene and polypropylene. This product does not have waterproof function, not suitable for outdoor use.

Note: Keep out of reach of children.

Storage: Keep in a dry and cool environment (21 degrees plus or minus 3 degrees) to prevent frost;

Shelf life: 18 months;

1. Furniture manufacturing industry: bonding mercury lens, aluminum sealing edge, handle, crystal board, marble, plate, etc.;

2,Adornment is decoratedIndustry: Bonding and fixing all kinds of wood threads, door covers,Gesso lineFloor tiles, decorative pendants and various wall panels, etc.;

3. Exhibition industry: adhesive fixationAll kinds of calligraphy and painting, signage, acrylic, exhibition GUI production and so on.

4,Ambry door plankIndustry: bonded crystal steel plate, etc.

This product is used for cladding materials, wood, gypsum board, metal, mirror, glass, plastic, rubber, skirting board, louver, threshold, window sill, boundary post, pillar, junction box, all kinds of artificial materials.Ornamental stonesFixed on concrete, brick, plaster, wall and board.

Clean construction surface to ensure no oil or dust.

Cut the pipe opening, install the nozzle and extrude with the sealing gun.

I. Dry bonding method (suitable for lighter materials and joints with light bearing capacity)

1. Extrude several lines of \"of\" type liquid nails at a distance of 40 cm;

2. Press one side of the nail with liquid to the bonding joint, pull it apart gently, and let the glue evaporate for 2-5 minutes;

3. Then press both sides together.

Ii. Wet bonding method (suitable for use with clamp tools when subjected to high pressure only)

1. Apply liquid nail according to dry bonding method;

2, with the clamp, iron nail or screw, immediately the two sides of the bonding or nail;

3. Remove the clamp after the glue is set (24 hours).

Bonding method of weight-bearing materials:

Can be directly bonded to the loading material. First, glue the loading material together, then separate it, wait for drying for about 5 minutes, and then firmly press, combine and knock the material to be bonded again, so that it is in place. A brace may be used if necessary. (Heavy materials must be supported)

Dry bonding method :(ceiling thread, toe thread, door frame, background wall)

1. Extrude \"of\" type viscose along the bonding surface

2. Squeeze the viscose side towards the adhesive side and press both sides tightly

3. Pull the two bonding surfaces apart and let the liquid nail super glue evaporate for 2-5 minutes

4.2 to 5 minutes later, press again and tap along the joint.

5. Temporarily fix the adhesive with auxiliary tools for 24 hours and then cancel the auxiliary fixation.

6.The adhesive effect can be achieved within 24 hours, and the product can be completely cured within 2-3 days

Wet bonding method :(wood floor,Marble countertopSuch as larger materials)

1. Apply liquid nail super glue according to dry bonding method

2. Press the bonding surface tightly to achieve the bonding effect within 24 hours, and completely solidify within 2-3 days.

Fast adhesion liquid nail has super fast adhesion, especially in multi-surface effect is more significant, as long as any surface is multi-empty structure, can achieve fast adhesion effect, adhesion process without any auxiliary device.