Bicycle

Product Weight: 0.12kg/piece packing quantity: 120 pieces/box

[Model]: 6688

[Net]]:89g

[Bulb]: CREE XPG

[Battery]: Built-in battery

[Material]: ABS plastic

[Gear]: 5-speed light sensing mode-yellow light-yellow light + white light strong-yellow light + white light weak-yellow light + white light flash

[Switch]: push button-long press off

[Charging method]: micro USB charging

[Features]: light sensing mode

A, instructions for use

1. Check the battery: make sure the battery has electricity and install the flashlight in the correct direction;

2. When the flashlight is in use, it should be chosen according to the requirements of the flashlight on voltage and battery, and should not be used indiscriminately to prevent burning the circuit board. Batteries with different models and different voltage should not be used at the same time;

3. In use, when the brightness of the flashlight changes obviously, turn off the flashlight to prevent the battery from overdischarge and charge it in time; Pay attention to the waterproof, moisture-proof and drop-proof of the battery, when charging, according to the charging speed of the charger, after the indicator light changes, take it out in time and do not overflush;

4. If the battery is not used for a long time, the battery should be fully filled and stored, and it should be charged and discharged again in about three months normally to avoid chemical corrosion;

5. Keep the inner wall of the lamp Cup clean. Never wipe it with hands or hard objects. Remove the fingerprints on the lens. Wipe it gently with a cotton swab dipped in lens cleaner;

6. Do not touch the flashlight with sunshine, water, chemicals and corrosive gases for a long time to avoid damaging the flashlight;

7. Do not disassemble the flashlight for non-professional personnel to prevent damage to the circuit board.

Second, pay attention to matters

1. Do not directly shine the light on the eyes to avoid harm to the eyes;

2. Do not use over-voltage, the voltage should not exceed 4.2V, and the battery should not be reversed, otherwise the circuit board will burn out;

3. Please identify the positive and negative poles of the charger when charging, and do not overcharge the battery to avoid damaging the service life of the battery (charging time is generally 5-8 hours)

4. When using the flashlight, check whether the screw thread is tightened or not, otherwise it may cause slightly light of the goods not lit;

5. The flashlight should be kept away from sunlight or high temperature environment. Please take out the battery after it is fully charged and store it in a cool and dry place after it is stopped;

6. The flashlight has the waterproof ability of life. Generally, there will be no problems in rain, but it does not have the diving function. Please do not carry this flashlight to dive or put it in the basin or bathtub for a long time;

7. To keep the O-ring (sealing rubber ring) and thread spinning smoothly, wipe Vaseline oil on its surface 2-3 times a year.

Three, charging instructions

The shortage should be replenished in time so as not to affect the battery life, and the battery should be charged during the long storage period.

  Jincheng trade  factory Direct Sales Integrity Management  main products: power torch, headlights, car lamp, diving lights, special for Zhaoyu and other medium and high-grade aluminum alloy torch and stainless steel flashlight.

Contact Information: 15957985852 Yu Yuntao