Product Features:
1The product is meticulously crafted, durable, and the craftsmanship is continually refined to achieve perfection.
2Attentive design, beautiful and exquisite

3. The selected materials for vehicle stickers have superior properties such as water resistance, oil resistance, corrosion resistance, anti-aging, heat resistance, durability, wear resistance, and color retention.

Small car stickers with transparent transfer film installation method (dry adhesive method):
Tool: cloth, scraping board or credit card with a transparent transfer film Large car sticker installation method (wet application method):
Tool: cloth, watering can, scraping tool or credit card

Product weight: 6-9g

Product size: 17.5*14.5cm

Product material: Laser reflective material

Warm Tip

Applying stickers to car paint seems like a simple task, but making them straight and smooth isn't always easy, especially when applying large patterns. If we remove the entire backing and then stick the sticker to the car, it's easy to leave fingerprints, and the stickers might stick to each other, making it difficult to control. Also, if the direction is wrong, it's difficult to pull the sticker up and re-stick it, as the sticker might become stretched due to its softness. We should start by lifting a small part of the backing from the corner of the sticker.(If necessary, this part can be cut off first.")Then carefully align the position, and stick the exposed adhesive part to the car. Then we observe whether the position is correct. If there is no problem, we can tear off part of the backing tape, and then stick it again until it is completely stuck.
The principle of sticking stickers is to stick them from the inside out, which means to start by sticking the middle part first, and then press your fingers outward to push out any air bubbles. If you stick them from the outside in, the air bubbles will be trapped.(At this time, for the sake of beauty, you can use a small knife to pierce the bubbles.")Another method is to first apply soapy water to the car shell, so that the stickers will not stick to the car shell and can be adjusted in position, or the air bubbles can be squeezed from the center to the edge to discharge. Soapy water will dry completely in half a day, do not touch it during this process, and it will be very firmly stuck after drying.