Watch maintenance
High-end watches are recommended every two to three years should do the corresponding maintenance, replacement of waterproof components, detection time performance and movement power consumption, cleaning movement, and maintenance appearance, such maintenance service will effectively extend the use of your watch time.
(1) wear a watch, sweat on the case is corrosive, steel case because of nickel chromium alloy, corrosion resistance is better, steel case is copper, long-term contact with sweat, easy to corrosion, should often use a soft cloth to wipe the sweat or pad plastic table support, to prevent its sweat erosion.
(2) do not open the table cover, so that dust into the movement affects the normal work of the watch.
(3) do not put the watch in the mothballs wardrobe, so as to avoid deterioration of the table oil
(4) do not put the watch on the power amplifier, audio, television, so as not to magnetize.
(5) long-term storage does not wear the watch, should be regularly wound every month, the automatic movement of the watch should gently swing back and forth for a few minutes or wear on the wrist for a period of time to make it automatically wound. Make the parts are not in a static state for a long time, to ensure the running performance of the table machine.
(6) ordinary mechanical watches by the tide, can use dry cotton pressure on the watch, then use40A tile bulb bakes5In minutes, all the moisture on the table will evaporate. If the quartz electronic watch by the tide, can be a number of small pieces of calcium chloride, wrapped with gauze; Then open the electronic table cover, will cover the calcium chloride and electronic table together in an airtight plastic bag or glass bottle, sealed. general3About an hour can be removed from the tide, so that the electronic table back to normal. For the table can be properly extended moisture absorption time.
(7) received a beloved watch, remove the outside packaging, do not want to save a good protective watch used in the box. The protection of the watch box, can give the watch the most safe protection in the ordinary do not wear, to avoid the watch is broken or by collision, so the box is absolutely necessary, and it is recommended that on weekdays do not wear a watch, form a habit of putting in the box, can greatly reduce the probability of damage to the watch.
(eight) usually the best not to wear the same watch every day, should be prepared to use a few different watches, in addition to the rich personal modeling, but also to avoid dust, body dirt all concentrated on the same watch. For leather watchband, more careful care, so as not to cause regular wear and tear watchband every day, so even if the surface is new, watch looks very old.
(9) put the watch on the wrist to sleep, if the watch is luminous watch, it will bring adverse effects on the body. This is because of luminous table pointer and dial coated luminous material, mainly is a mixture of radium and zinc sulfide, radium emitted rays can stimulate zinc sulfide crystal luminescence, sleep, if wearing a table, the human body will be eight to nine hours of radium radiation, have a certain harm to the human body. Therefore, before going to bed, it is best to take down the luminous watch, put on the table.
(10) table cover refurbishment. Watch is marked out after a lot of lines, you can put a drop or two of water on the table, and then squeeze a little toothpaste wipe, you can take out the lines and make the table as new.
Note: copper case identification
Watchcase according to its material has gold shell, steel shell, aluminum shell, copper shell, titanium shell, alloy shell, plastic shell, wood shell and so on. Usually we contact, use and choose the most is all steel watchcase and watchband watch. But you may not know, there are a lot of brand case material for all steel watch is actually copper case. (also known as half steel watchcase) copper watchcase (also including watchband) relative to the whole steel watch, the manufacturing cost will be several times lower, there is a larger profit margin. So a lot of businesses are making a big deal out of this,\"Bronze imitation steel\"With extremely low price as bait to attract buyers to buy the eyeball. Therefore, this paper makes a brief introduction to the distinguishing method of all-steel table and semi-steel table:
a.All steel coating light in the dark, rounded edges, no sharp feeling. Copper watchcase coating bright white, table ear back sharp edges and corners, table ear back can be clearly seen after cutting the ring pattern. And the depth of grain size is not uniform, arranged loose. And all the steel watchcase lines are fine and symmetrical, arranged tightly and neatly.
bAnd in the ear corner part (can be tested in the back of the ear) with a knife in a small distance gently scraping, such as its internal yellow is copper case.
c, copper watchcase corrosion resistance is poor, such as maintenance improper use of a period of time after easy to fade (yellow or red), coating blistering or peeling phenomenon

Lovely stereo watchband suits little girl to wear very much, be about to be this year 61 children's festivals can hot sell article!

Attention please buyers

This shop is mainly based on wholesale, wholesale quantity, sometimes it is impossible to check every watch

If there is any quality problem, the goods can be exchanged accumulatively, and the freight of more than 10 will be returned

If it is less than 10 pieces, our store does not bear the freight, please do not take if you mind