Universal E6000 glue acrylic drill glue diy mobile phone beauty manicure accessories material glue

Product description:

E6000 self-leveling adhesive is suitable for toys, rhinestones, decorations, flowers, lighting, ornaments, LCD bezels, mobile phone accessories, etc. Crystal crafts, handmade calligraphy and painting paste diamond products, earphone earplug accessories products, etc., can be glued to special products and other difficult to connect goods, E6000 pungent smell is small and there is Dan Dan qingxin fragrance; It belongs to a new type of single-component transparent solution adhesive, which can be cured at room temperature, easy to operate without re-packaging, and can be used with high elasticity and soft adhesive film, preventing vibration and waterproof after curing.

E6000 adhesive can paste more material, it in metal, glass, ceramics, stone, bamboo, wood, cloth, leather, PVC, ABS, nylon, foam, film, fabric, electronic components, plastic, rubber, fiber, paper, mobile frame, LCD screen, in the box, and other materials have good adhesive performance.

Iphone4 4S 5G generation samsung LCD touch screen frame frame bracket glue

Instructions for attaching the LCD screen and the frame in the frame: put some points in the seam of the phone's upwarped, bracket or frame. Press tight, about a few minutes to dry, the excess can be wiped off with alcohol. It's very easy to use. It works very well.

Baby features: colorless, tasteless, not albino, alcohol gently rub, can be perfect to remove excess glue. The first time is not good, you can drop some alcohol or easily take it off and start again.

Special note: please make a small part of the test before use, so as to hold the method correctly and apply the dosage. Heating by electric hair dryer or hot air gun will accelerate the curing effect.

Technical data

Solid content: 35%-39%

Hardness after curing: 70-85t

Surface dry time: about 2 minutes to 5 minutes positioning

Full curing time: 24-48 hours

Save: save at 10 to 28 degrees

Net content: 110ML 50ML 25ML 15ML

[usage]

1. Please read the product description carefully before use.

2. Please do small area experiment before large area use.

3. Please ensure that the sticky surface is clean and dry.

4. The operating temperature should be between 18 and 32 degrees.

5. The product can be evenly coated on the surface of the sticky material directly after the cover is opened.

6, wait 3-5 minutes, will be the two adhesive alignment slightly pressure.

7. Keep it straight for several hours, and reach the paste strength after 48 hours.

8. Put the cap on the bottle when the product is not in use to avoid curing after the glue contact with air.

This shop also has each kind of drill glue order to inquire according to the box wholesale more preferential to know more product information please add the following WeChat thank you!