[t-6000 technical data]

Solid content: 28-35%

Hardness after curing: 70-85a

Surface dry time: about 6 minutes

Full curing time: 24-48 hours

Save: save at 10 to 28 degrees

Net content: large 110ML/ small 25ML

[scope of use]
DIY hydraulic drill mobile phone shell decoration jewelry accessories
Repair damaged edge corners by filling nail holes and drilling holes

Metal, glass, ceramics, stone, bamboo, cloth, leather,

Nylon, sponges, films, fabrics, flowers, ornaments, toys,

Plastic, rubber, fiber, paper, electronic components,

PE, PP, PVC, ABS, crafts, components...

Remove the drill and leave no trace

[usage]
1. Please read the product description carefully before use

2. Please do small area experiment before large area use

3. Please ensure that the sticky surface is clean and dry

4, the best use temperature should be between 18 and 32 degrees

5. The product can be evenly coated on the surface of the sticky material directly after the cover is opened

6, wait 3-6 minutes, will be the two adhesive alignment slightly pressure

7. Keep it straight for several hours, and reach the best paste strength after 48 hours

8. Put the cap on the bottle when the product is not in use to avoid curing after the glue contact with air

The store also has various brands of drill glue need to contact customer service or add WeChat for more product information (wholesale by box is more cost-effective oh)