Search history
Clear allSearch by image
XDrag and drop an image here or upload an image
Max 5MB per image
UploadSign In | Join
X Email Mobile
Chenjie Electronic Technology Co., Ltd 15yr.
Contacts Zhao Lifang Chat
Mobile 86-13606899076
E-mail 362163078@qq.com
13606899076









How to use for trimming hair bobs:
1. Place the fuzzy parts of the sweater/blanket etc. on a flat surface and flatten them;
2. Turn the switch to the ON position. Do not press the blade firmly; instead, slightly lift it and remove the lint balls slowly.
3. When trimming hairballs from thin fabric, a protective ring should be placed on the outer cutting mat;
4. When the wool balls accumulate to about eight parts, turn off the switch to lower the container, remove the wool balls, and reinstall the container before continuing use to prevent the wool balls from scattering;
This trimmer comes in three levels: low, medium, and high. Please choose the level that suits you best. For the first use, charge it for 12 hours!
★: Power supply voltage 220V, frequency 50Hz, output power 3W. The indicator light turns on during charging. Charging time is 8 hours.
★: It is prohibited to use it for purposes other than removing fabric lint balls. Test on an inconspicuous part of the fabric before use. Lint balls that are too large (diameter over 6 mm) may not be able to be lifted.
★: Unless it is for cleaning the lint trap, do not remove it. Do not use it to trim hairballs from stockings, otherwise the stockings may be sucked into the blade and cause damage.
★: Be careful not to scratch your hand when removing the inner blade tip. Do not press or impact the outer blade net with force.
★: Please clean the body of the device with a dry cloth. The dust container should be emptied when it is about 80% full. The inner side of the external blade mesh and the center of the blade head may suffer from lint accumulation, which affects sharpness and rotation; please clean them with a small brush.
Update time:
TOP