With connector: T10 socket, spring double-pointed connector (the above price is not equipped with Connector, if you need to match the head, please match the link)

Name: 3-core 5050 18SMD SMD car light board

Color: white/ice blue (support to customize other colors)

6SMD length 2.2 * width 1.5CM (small)

Voltage: 12V DC (that is, the output voltage of General cars)

Support ordered do 24V

Uses: reading lights, roof lights, trunk lights, room lights, etc.

Instructions for Use: 3M adhesive stickers are attached to the back to facilitate fixing (to avoid the light board moving in the lampshade).

With connector selection: T10 socket, double-pointed connector, BA9S bayonet connector

Joint dimensions introduction

Double tip diameter: 8.5mm length: 31mm-41mm
BA9S diameter: 9mm
T10 diameter: 9mm

Installation:

1. The diameter is the same as the traditional bulb, which can directly replace the traditional bulb without modifying the line
2. Refer to the product shape and size when installing. Pay attention to the size of the installation position space, press carefully, do not squeeze the LED chip, so as not to be damaged.
3. Not suitable for 24V large truck buses, please check carefully before installation!

Performance: 1. Energy saving: it is 1/10 of the energy consumption of traditional halogen lamps, which can better protect the car circuit
2. Long service life: the service life is 30000-50000 hours

Features:
1. Adopt 3-core 5050SMD Paster LED, low power, high brightness, energy saving and environmental protection.
2. The model is the same as the original car. When installing, you do not need to replace any lines. You can directly replace the old glass bulb. It is equipped with 3 kinds of interfaces and is suitable for most models.
3. Light up without delay.
4. Green color environmentally friendly light source, comfortable and convenient.

5. High brightness, strong vibration resistance and low temperature rise, is a new generation of solid-state light source