Product profile:

model : y - 02

The material : aluminium alloy

color : black

The weight of the : naked light weight alone -175g, package weight 315g + / - 5 g

gear : strong light, weak light, flash

function : waterproof, lighting, self-defense, disaster relief supplies, high flashing lights

The power supply : 18650 lithium battery *1

life : strong light for about 2 hours, weak light for about 4 hours

voltage : 3.7 V to 4.2 V

Lamp bead * 1: LED

Target range : 200 m

waterproof : IPX56 (self-test value)

power : 10 w

brightness : 800 lumens (theory)

size : 160 * * 30

packaging : single plastic box: 17.5*11.5*5cm/packing: 100pcs 59 * 52 * 36 cm

A. Switch instruction

1. The battery shall have the positive pole facing inward (the other side of the lamp cap) and the negative pole facing outward (the tail).
2, switch in the tail, switch function switch is switch function, light switch is dimming function.
2. Circuit board instruction
1. Our flashlight adopts advanced constant voltage and current technology, which can effectively solve LED flashlight's requirements for constant voltage and current.
2. Special tips: a. do not use voltage, the voltage should not exceed 4.2v b. the battery is facing forward, do not put it in the opposite direction, otherwise the board will burn c. pay attention to control the change of flashlight temperature to ensure heat dissipation d. do not open the circuit board for non-professionals
3. Warranty description: open or processed circuit board is no longer covered by warranty.
3. Instructions for lithium battery use
1. Characteristics of lithium battery: the charging mode of lithium battery and mobile phone battery is completely different; Lithium battery has no memory, can be charged at any time, do not overcharge.
2, charge for 6 hours less, after the charger according to the green light is ok, not necessarily overcharge.
3. It is especially suggested to use the \"three-proof\" charger with anti-overcharge, anti-reverse connection and anti-short circuit;
4. If the battery is not used for a long time, the battery should be fully stored and recharged and discharged in about three months.
Four. Instructions for use of the torch
1, flashlight in use, according to the flashlight on the voltage and battery requirements, do not use in order to avoid burning the circuit board, different models, different voltage of the battery do not use at the same time.
2, in use, when the flashlight brightness significantly changed to close the flashlight, to prevent the battery overdischarge.
3, heat dissipation skills: in the use of the flashlight, to ensure heat dissipation. It is strongly required that when the battery is fully charged, first use the second gear, so that the lamp holder and battery of the flashlight can be extended the life of the product! Do not use the flashlight directly in the eyes of people, especially children.
Five. troubleshooting
1. Check the battery: make sure that the battery is charged and installed in the right direction. Do not use batteries of different brands or mix old and new batteries.
2. Check the tailcap: ensure that the switch is tightened and in good contact, ensure that the copper column of tailcap is in good contact with the metal plate of the gland ring of tailcap, and pay attention to whether the lamp cap is loose.

For buyers: due to the different shooting Angle, lighting, display and other aspects of the impact, the product will have a certain color difference, everything in kind prevail!

The details page is for reference only, the actual received material subject to.

The details and pictures are for reference only. All are subject to the receipt of the goods