Contact us:

Telephone: 0579-85607545

Phone: 15381751696

Purpose: hang the tag on the trademark of the garment collar. Also used in socks, towels, gloves, carpet MATS, shoes and hats, plush toys and other knitted textile products and other USES.

Description: tag gun

Operation method:

1. Install the glue needle and insert the attached strip of glue needle into the circular seam on the top of the tag gun.

2. Put a label on the needle, push the needle through the tag hole and the fabric, and squeeze the trigger.

3, on the blade, when inserting a new blade, to be careful to install it in the correct position, that is, to insert it to the top.

4. Adjust the steel needle inside, make the needle cap align with the needle, turn the bolt forward, and pull out the needle.

Usage: 1. Take the glue needle and insert it into the cross groove above the tag gun.

2. Press the handle of the tag gun, and the glue needle can be shot.

3. First pass the gun needle through the round hole of the tag and directly insert it into the clothes. Then punch the glue needle and attach it to the clothes to hang the tag.

4. To remove the glue needle, press down the black button above the tag gun to exit the glue needle.

Hang tag gun has two kinds of thick and thin, must pay attention to distinguish thick hang tag gun suitable for thick clothes thin clothes or some clothes hang tag gun gun needle is thick, the hole of the needle is big, should be used with rough shape plastic needle matching!

Fine hang tag gun needle is thin, the hole of the needle is small, to be used with fine shape plastic needle matching!

Important: do not point the gun at people or animals to avoid shooting out needles. Do not use the gun as a toy for children. The needles are very sharp.

Please contact customer service for the following products