Resin plastic snap fastener T3/ T5/T8 special tool!! Only plastic and resin materials can be installed

T3 refers to double-sided 1CM snap fastener

T5 refers to double-sided 1.2CM snap fastener

T8 refers to large surface 1.4CM and small surface 1.2CM snap fastener

please pay attention to the following points if the success rate is low!!

The main principle of installing plastic snap fastener is to flatten the nails of the face buckle to fix the female buckle,

it will not fall. Some students think that pulling out the rubber sleeve on the head of the hand press pliers,

you can clearly see the situation of pressing buttons, which can improve the success rate,

this is actually very wrong and really not desirable. The main function of rubber sleeve is to press the male and female buttons,

make it close to the veneer buckle, so that the pressed button will be smooth,

it won't be crooked like when you don't use a rubber sleeve.

Product Name] Hualian hand pressure dotter (dedicated for resin snap button)

[Product size] 18 * 10cm

[Product weight] 300g

[Packaging instructions]] blister card package, one set per card

[Product use] it is a good helper for clothes maintenance and clothing store buttons falling off.

[Mold description] standard T5,T8 upper and lower models.

[Supplementary Note] the paint on the surface of this machine will fall off, and the paint will fall off. It is not within the scope of return and exchange.