Factory Direct Sales Hand Press Pliers Snap Fastener Hand Pinch Pliers (T3 T5 T8) 厂家直销手压钳子四合扣手捏钳子（T3 T5 T8）

Resin plastic four-pin fastener T3/T5/T8 special tools!! Only for installing plastic and resin materials

T3 refers to a double-sided 1CM four-in-one clasp

T5 refers to a double-sided 1.2CM four-button closure

T5 refers to a four-in-one fastener with large parts measuring 1.4 CM and small parts measuring 1.2 CM.

If the success rate is low, please note the following points!!

The main principle of installing the plastic snap fastener is to flatten the nails of the surface clip, thereby securing the male and female clips.

It will not cause it to fall off. Some students think that removing the rubber cover from the end of the hand press pliers is sufficient.

The situation of the pressing buckle can be clearly seen, which in turn increases the success rate.

This is actually very wrong and not advisable at all. The main purpose of the rubber cover is to hold the male and female buckle in place.

Make it tightly adhere to the surface clasp; only in this way can the clasp be flat when pressed.

It won’t be crooked like when there’s no eraser cover.

[Product Name] Huajianli Press-Type Closure Machine (Special for Resin Four-Button Closures)

【Product Size】 18*10 cm

【Product Weight】300 grams

【Packaging Instructions】Plastic card packaging, one set per card

【Product Use】A great aid for clothing maintenance and urgent replacement of button losses in clothing stores.

【Mold Instructions】Standard configuration includes T5 and T8 upper and lower molds.

[Additional Notes] The surface paint of this device will peel off; the paint peeling issue is not covered under returns or exchanges.