Factory Address: Dongyang Hengdian industrial zone
 24-hour customer service online: 13989445063 WeChat with the same number

1. Temperature

     Customers should choose their own magnet brand according to their working temperature when choosing NdFeB magnet. If the working temperature is higher than the magnet brand bearing temperature, the magnet will gradually demagnetize until it is non-magnetic. Please be sure to confirm the working temperature and the brand suitable for your own use before ordering.
2. Environment
If the magnet device is used in a sealed state, you can consider choosing a magnet with no plating or white zinc plating on the surface, which can save costs. If the magnet is exposed to humid air, especially in the salt fog state, it is recommended to consider the magnet with nickel plating on the surface. Magnets should be stored in a dry and constant temperature environment, separated and wrapped with plastic, wood chips, cardboard, foam, etc. Keep away from iron and easily magnetized items, such as monitors, bank cards, computers, televisions, mobile phones, etc.
3. User objects   

With regard to environmental protection, for relatively developed countries, users in North America, Europe and other places should pay special attention to environmental protection matters, and export use must pass the six EU standards of SGS. For users in China or some underdeveloped countries, environmental protection requirements are not considered.

4. Handling and stacking

     NdFeB strong magnetic material is hard, brittle, strong magnetic field, it should be taken lightly (especially large size and sheet), when the strong magnet itself or with other iron suction or separation, careful operation can not impact. Otherwise, it is easy to cause collision and damage the magnet or hurt the finger. Because NdFeB is a multi-metal alloy material with a density of 7.45, it has the characteristics of heavy and brittle. Therefore, be careful when handling and holding to avoid magnetic fragmentation. The storage environment should also be kept dry. Do not pile it directly on the ground. It is better to pad it with thick cardboard or place it on the shelf.

5. Access instructions

     When the magnets can't be drawn and separated from each other, it is recommended to push them horizontally and stagger them, and do not pry them hard. Use the left hand to fix the whole magnet, and use the index finger to cooperate with the thumb on the right hand to move the magnet horizontally. After moving out, do not throw the moved magnet back to the magnet pile immediately, please isolate the magnet immediately. Take it lightly, and wrap the taken-out paper in a place far away from the iron or the magnetic thing (about 16cm) or paper, so that it is safer. If you need to put the magnet back into the whole magnet, please put it back slowly and move it in close distance from the edge. The hand must hold the magnet until the magnet has been moved in.