Click to Contact Yiwugo official customer service for International sourcing.
LED rechargeable flashlight
Red product noLED - 972
The product has a built-in long life, rechargeable and maintenance-free high capacity350mAH lead-acid battery;
Long life batteryMore than 500 cycles of charge and discharge;
Use energy-savingHigh brightness and long life LED;
Strong and weak light is optional.
|
Product parameters
The Product Specifications
|
Material: ABS environmental protection raw material
Product color: red
Number of lamps: 4
Power supply: built-in high capacity battery
Battery capacity: 350mAh
Available time: 12 hours
|
Color temperature: white light
Package size: 74x169mm
Outer box size: 55.7x38.6x34.6cm
Gross weight: 19.5kg
Product size: 48x48x118mm
Bar code: 6939020402720
|
|
Directions for use
Instructions
|
· when charging, push out the ac plug of the flashlight completely and directly insert it into the AC90 ~ 240V power socket. When the corresponding charging light is on, it indicates that the flashlight is in charging state and has sufficient power for about 7 hours.
· low light and strong light lighting functions can be selected when the switch is pushed to first and second gear.
· when the switch is pushed into first gear, it can be continuously used for 12 hours when fully charged. Push the switch into second gear and it will last for 6 hours on full charge.
· two leds will be lit when the switch is pushed into first gear. Switch to the second position will light up 4 leds.
· in the use process, when the LED bulb is dim and bright, the battery tends to discharge completely. At this point, in order to protect the battery, it should stop using and must be charged in time (it should not be charged when the LED bulb is out of light, when the battery is vulnerable to damage and failure).
· LED flashlight should be used for charging frequently, please do not use it for a long time. If not frequently used, please recharge for more than 5 hours every three months after storage, otherwise the battery life will be reduced.
|
|
Maintenance instructions
Maintenance
|
· the charging power supply and socket shall be installed in accordance with safety specifications.
· do not use the product when charging to avoid burning the LED bulb or internal charging parts of the power supply.
· do not shine the flashlight directly into your eyes, so as not to affect your vision. (children should use under the guidance of adults)
· do not allow the product to get wet or wet.
· keep away from inflammable and explosive items when charging each time. The maximum charging time shall not exceed 24 hours. (charging is recommended during the day).
|
Update time:20191230111500