Contact PersonHENRY +86 15805898923ELENA +86 15958482343   
WeChat, WhatsApp, same mobile number. WECHAT or WHATSAPP = MOB No.
Store location: 2nd Floor, Street G2-14856, 3rd Street, Door 41, International Commerce City, Yiwu
Booth#: G2-14856, 2 Floor, 3 Street, 41 Gate, 2 District, Yiwu International Trade Mart

High-performance industrial instant adhesive - ZXH-401 transparent glue

1401 adhesive is a high-strength, rapid-setting adhesive that is suitable for high-speed bonding work on a variety of materials, especially suitable for use in the woodworking industry.

2. For materials with close contact and porous properties, such as rubber, metal, plastic, wood, etc., the strongest adhesion effect can be achieved.

3、This adhesive is a single-component adhesive, without solvents, and does not require catalysts, heating, or pressure-sensitive adhesives. It only needs a thin layer of adhesive, and it can use the air toThe atmospheric humidity leads to a high degree of aggregation, achieving the best adhesion effect.

Main Technical Performance:

1. Operating standard: normal temperature operation, active use period of 2 (min), complete curing time is 2 hours;

2. Main Performance: Typical Viscosity 100(cps).

Color: Colorless transparent liquid

4、Storage: Seal and store in a cool, shady place.

Shelf Life: 1 Year;

6、Packing Specifications: 1kg/bottle, 500g/bottle, 20g/stick, 50 sticks/box, 500 sticks/piece

Main Use:

1. 401 glue is a general-purpose, medium-viscosity, fast-drying adhesive. It is used on inert surfaces and adheres to porous, acidic, and absorbent materials.

.2. Widely applicable to metal, plastic, rubber, wood, leather, ceramic, wood board or PVC plasticized and other difficult adhesive materials.

Usage Method:

1. First, clean the surface, removing any dust, oil, rust, and other contaminants. For metal surfaces, it's best to rough grind first. For PE, PP, or PTEE plastics, you should first make them smooth.Surface activation.

2. Open the front cover and gently tap the tip with your fingers to ensure no residual liquid remains, then cut out the holes with scissors.

3. Drop a small amount of adhesive on the surface to be joined, immediately proceed with the joining, and maintain until the adhesive is fully hardened. The area of the joint should not be too large, and the thickness of the joint layer should not exceed 0.2mm.

4. After use, wipe the container clean and cover the lid. Store it in a cool and dry place or refrigerate. After applying the glue on the adhesive side, press it firmly to the surface to secure it.

Special Note:

1. Be careful not to let the glue drop into your eyes or into your mouth.

2. Do not allow children to come into contact with it, to avoid any danger;

3. Be careful not to adhere to the skin and fingers; if it touches the hands, it can be washed with soap, water, detergent and pumice.

4. Prohibited from exposure to direct sunlight and high-temperature areas. Please store in a shady place.

5. Avoid contact with skin and eyes. If contact occurs, immediately wash with large amounts of water and seek medical attention. To cleanse the eyes, use a weak solution of sodium bicarbonate.