Product description: stainless steel inner hook is made of high quality thick strong non-marking silicone, super sticky, can also be used in places where hard powder does not fall off and Gray is slightly uneven! In addition, if the special-offer transparent strong glue is electroplated iron hook, it is only suitable for installation on a flat, hard and smooth surface, and the use Effect of other walls is not good. Please read the introduction clearly and choose your own suitable products! Thank you for your cooperation!

Another







 

The new patented product is firm and reliable, even the hemp surface is firmly attached, which can be persistency stronger than any sticky hook. No longer have to worry about the sticky hook falling off! It's like nailing!

Traceless solid glue, this kind of solid glue is soft and elastic. When pasting, it can fill tiny gaps on the non-smooth surface, and the air is not easy to enter, so it can bear heavy loads strongly, and because of its good toughness and elasticity, therefore, tear and pull from the wall, there will be no residue, no trace, because the sticky surface is affected by sticky dust during use, when the stickiness is not good, you can also use clean water to wash it gently and then dry it to restore the original stickiness. Due to improper use, you can use it again to ensure that the sticky patch is not deformed. Not ordinary foam tape! Ordinary foam self-adhesive because the base material is foam, which is easy to tear, it is easy to leave traces on the wall, because it is liquid and does not resist high temperature. When the high temperature reaches about 40 degrees, self-adhesive is viscous liquid and loses viscosity, so it is easy to slip and has poor load.

  Product features:

    1. Strong weight bearing, because the paste area is large, and the colloid can fill the gap of the non-smooth surface, it can be super heavy bearing, generally 5~6kg, for relatively smooth surface even up to 10kg, at present, no other sticky hook has such a strong load. (Some vacuum suction cups can be very heavy-bearing but unstable, easy to fall into the air, and can only be used for smooth surfaces. Electrostatic suction film hooks are heavy and stable, but cannot be directly used on rough walls.)

   2. No trace, no residual glue, wonderful stickers, no trace hook, is solid glue without substrate, good elasticity and toughness, not easy to tear, no residual glue marks that are difficult to remove after tear and pull, keep the wall clean.

   3. Firm and stable, the adhesive patch has a certain flexibility, and the area is larger than the hook base itself, which is stronger and more reliable than any hook on the market. Don't worry about falling off

    4. It is suitable for all kinds of wall pasting, and even the rough surface of the hemp surface has a good pasting effect. No matter it is smooth or non-smooth, it can be used as long as it is a hard wall without losing powder. It is really high-tech!

   5. Good weather resistance, several degrees below zero in winter and 40 degrees in summer will not affect its adhesion and remain firm. Ordinary hooks are affected by high and low temperature, and the viscosity decreases, or the intake falls off due to shrinkage and expansion deformation.

   6. Super waterproof, ordinary sticky hooks will fall off when exposed to water, our wonderful stickers are seamless hooks, splashing water, damp walls, and even soaking in water are still firm.

   6. Transparent and invisible, the adhesive patch and colloid itself are transparent, and it feels like a small hook on the wall, which will not damage the overall beauty of the wall.