![]()
|
Product Name: DIY Silicone Cake Mould Set (4-Piece)
|
|
Product size: 18.8*5.5cm
|
|
Product weight; 170g per piece, 42g each
|
|
Product packaging: OPP bag
Product features: anti-scalding, non-stick, easy to clean
Packing: 100 sets
Volume: 0.04
|
|
Silicone mold features:
1. Silicone is mainly composed of silicone, a natural component found in sand, stones, and crystals. It is not rubber or plastic! Silicone is the stone on the beach, low carbon and environmental protection.
Silicone is highly flexible, corrosion-resistant, and has good temperature tolerance, making it suitable for cooking and baking. It is a raw material that can be directly used in contact with food and is simple and practical.
3. By detection, health and hygiene, natural antibacterial, can eliminate the proliferation of bacteria and fungi. Therefore, in baby products and medical supplies, there are a large number of silicone products, such as baby bottles, silicone plastic surgery, etc.
4, recyclable, durable, low energy consumption.
5. The product has stable structural mechanical properties, which makes it resistant to temperature and has a wide temperature range. It can withstand temperatures from -40°C to 230°C, with uniform heating and cooling.
6. Has anti-corrosion performance against cleaning agents and other types of corrosive substances and is easy to clean.
7. After use, no ingredients will stick to the mold!
Silicone product usage instructions:
1. After the first use and each time, clean it with hot water (diluted with dishwashing liquid) or place it in the dishwasher. Do not use abrasive cleaners or sponge cleaning. Ensure that the silicone mold is thoroughly dried before each use and storage.
2. When baking, the silicone molds should be placed separately on a flat baking tray. It is absolutely forbidden to let the molds dry-bake. For example, if you have a six-piece mold, you only fill three molds, and the other three must be filled with water. Otherwise, the molds will be damaged, and the service life will decrease. In order to achieve the best baking effect for the baking products, you can lightly spray a small amount of non-stick baking sheet oil on the surface of the silicone mold before baking.
3. When the baking is complete, please remove the entire baking tray from the oven and place the baked products on a cooling rack until completely cooled.
4. Silicone molds can only be used in ovens, toasters, and microwaves. They should never be directly used on gas or electricity, or directly above the heating pan or below the grill.
5. Do not use a knife or any other sharp tools on the silicone, and do not apply pressure, pull, or use violence.
6. Silicone molds (due to static electricity), they are easily attracted to dust, and it is best to put them in a paper box and store them in a cool place if they are not used for a long time.
7. Do not immediately rinse with cold water after taking it out of the oven to extend its service life.
