The pioneering USB interface laser stamp engraver - uses a USB 2.0 interface, with stronger anti-interference capabilities and more stable performance.
Completely rid of the troubles of the new generation of computer motherboards without print interfaces, CoerLDRAW software directly outputs, supporting Chinese, Japanese, Korean, and English. Introduction to the ST-E40 Export Horizontal Seal Engraving Machine:
STThe series of horizontal laser engraving machines have been tested by the market for nearly ten years, and have continuously updated their technology on the basis of stability and reliability. They are widely used in industries such as seal making, craft engraving, and electronic and electrical appliances. These machines are characterized by simple operation, fast engraving speed, standard font, clear stamping, and are also one of the high-tech products that combine traditional seal carving techniques with laser and electronic technology. Due to the selection of power-stable, ultra-long-life laser tubes and imported lens combinations, the life and reliability of the ZT series seal engraving machines have been significantly improved.
Applicability: Seal making: able to directly carve bullhorn seals, organic glass seals, plastic seals, and rubber seals, etc. Pattern making: able to carve names, specifications, and various patterns on organic glass and electronic components, with permanent and anti-counterfeiting characteristics.
Performance Features:
1. Large character library capacity, standard font types, and a rich and varied selection of fonts.
2. Fully computer controlled, with high degree of automation.
3. Achieve what you see, fully reflecting the design requirements.
4. Suitable for a variety of non-metallic carving, with a wide range of applications.
Laser engraving machine usage precautions:
1. Make sure to loosen the screws that fix the crossbeam before turning on the machine!
2. Turn on the machine before water is fully connected to prevent damage to the laser tube.
3. Before turning on the machine, make sure to connect the ground wire (one end to the screw on the lower right corner of the machine, and the other end welded to a large nail, which is driven into the ground or connected to a water pipe), which can protect the machine.
4. The machine should be placed in a well-ventilated area, as the circuit board is most susceptible to moisture.
During thunderstorm season, if you do not use the machine, you should unplug the power cord and data cable to prevent lightning strikes.
6. If the software or computer system fails, causing the machine to walk blocked, quickly turn off the machine power. |
