SPE - 006539 XTS60120 various large housing special screen printing machines

This screen printing platform is suitable for printing all kinds of flat boxes within 1000mm in length and width, such as cartons, iron boxes, plastic boxes and wooden cases. The actual printing pattern size is within 800* 400mm in length and width.
Mesh frame is suitable for all kinds of mesh frames with maximum outside diameter of 1000*550 mm and thickness of up to 30 mm.
Two-person operation, especially suitable for screen printing of small batch carton, iron box, etc.

, accurate printing, positioning way diversity;

1. Positioning and printing of carton: The machine has 4 positioning blocks at both ends of the frame, which can directly jam the positioning of the box edge; There are 6 positioning plates with needles (1.2mm in diameter) on both sides of the main frame. After positioning the edges, press down the printing plate, and insert the positioning needle directly into the carton for printing.

2. Positioning and printing of iron box: There is a positioning block with clamping edge at both ends of the frame of the machine, which can directly jam the positioning of the box edge; Six positioning plates with magnets are installed on both sides of the main frame. After positioning the edges, press down the printing plate. The magnets are directly adsorbed on the surface of the iron box and completely positioned, and then printing is carried out.

3. Positioning printing of plastic boxes, non-iron boxes, wooden boxes, etc. : according to the external dimensions of the printed products, install positioning plates on both ends of the main frame and jam both sides of the box body before printing.

Second, easy to operate, fast and comfortable printing;

1. Only loosen six screws to install the mesh frame, which can be directly put into the shelf; Tighten the screws to fix the net frame, and then fix both ends of the strip card board to completely fix the net frame.

2. The scraper placement stand prevents the scraper from tipping and is clean and tidy;

3. Set the handles on both sides to lift the whole machine easily and move it;

4. According to the case, the positioning block for both sides of the clamping card can be installed unilaterally or double-sided;

Third, the structure design is reasonable, the whole is firm and stable

The whole machine is made of special aluminum alloy material and oxidized surface and steel plate parts. All components can be moved according to the screen frame and printing patterns to achieve the most accurate positioning, the most easy operation, the most convenient movement.
The machine except aluminum alloy material, the other parts are electroplated surface treatment, corrosion resistance, clean resistance, long-term use without rust.
All metal parts are made of high quality 2 mm thick steel plate laser cutting, some parts of the installation holes are long, convenient for users to adjust the needs.

Iv. Requirements for export products from Europe and America and their packing quality, small volume and light weight;

Equipped with a full set of installation tools and detailed installation instructions, and with wearing parts replacement; Users do not need additional tools to easily install and use
Export European and American standard five-layer carton packing, each kind of metal parts in the box are individually packed or placed separately, to ensure that all kinds of metal parts do not contact directly.
The outer packing size is 65*13*13 cm (0.013 m3), the net weight is 6 kg, and the transportation cost is lower.