006601 SPE-BQM240 softball cap printing machine

This machine is mainly used for printing various cambered surfaces and irregular cap masks made of soft materials such as cotton fabric, chemical fibre cloth and sponge. Such as baseball cap, sun cap, cap, fisherman's cap, Lei Feng cap, zhongshan cap, octagonal cap all kinds of soft materials, as well as various materials of the mask, etc., the use of this machine can effectively improve the printing quality, improve the printing efficiency.

There are many kinds of hat masks with different shapes and sizes. The printing position is inaccurate due to the difficulty in positioning. The printing surface is curved surface with various bending degrees, irregular bending, various hat shapes and other special characteristics. The difficulty of fixing the hat and cambered screen plate suitable for different cambered surface of the hat body in printing causes the printing efficiency of this kind of hat is very low, and the printing quality is difficult to guarantee.

The soft hat screen printing machine designed by our company can basically solve the above two difficulties:

1. Arc adjustment positioning of cap and mask tooling: adjustable arc surface tooling is adopted, which can adjust arc curvature according to needs to suit the radian of various caps and masks;

2. Cap and mask positioning: Place the cap or mask on the tooling, and position the cap and mask on the vertical plate of the tooling with 4-6 magnets on three or four sides; The hat or mask will be firmly fixed; To take off the hat, just take off the magnet, convenient and quick; Easy to put in the hat, the hat does not deviate;

3. The stainless steel cambered screen plate can be fine adjusted and bent with the left and right manual knobs according to the cambered surface of the hat; To meet the requirements of suitable cap printing surface radian, so as to ensure the screen plate cambered surface and printing surface as parallel as possible, to ensure accurate printing positioning, to ensure the quality of printing.

I. Basic functions of the machine:

1. The bottom platform of the machine can be moved back and forth, and the dragging positioning device can be set; Drag the platform out, put it into a cap or mask, and fix it with the magnet; Push into the machine for printing; Pull out the platform, remove the magnet, remove the hat or mask; Both pull out and push in can be accurately positioned by positioning ball screws on both sides of the platform;

2, the host can be left and right, up and down the manual knob fine adjustment type; 170mm up and down; With a handle lock; Left and right adjustable 20 mm and screw lock.

3, use 1 mm stainless steel sheet, net box directly fixed to the frame beam on both sides; Before and after the screen can be 130 mm; Screen install beams by hand screw adjusted for screen radian; Adjust to with basically the same printing surface radian after two head screw locking two beams.

4. The magnet is completely covered with rubber layer, which has a high adsorption capacity and will not damage the hat or mask; Magnet with handle, easy to use, fast, labor-saving.

5. Two flexible stainless steel mesh frames are randomly configured; The inner diameter is 100* 190mm (the outer diameter is 130* 200mm); 100*240 mm (od 130*250 mm); Basically suitable for most of the soft hat printing patterns.

6. All parts of the machine are surface treated with advanced electrostatic spraying, corrosion resistance, acid and alkali resistance, cleaning resistance, and long-term use without rust.

2. Supporting equipment of this machine (you can choose and buy according to your needs, and see relevant webpage for detailed information of supporting equipment) :

1, SPE-3040 special stretch screen machine for cambered screen: due to the soft cambered screen plate, ordinary stretch screen machine is not available; This stretch net machine is specially used for arc screen stretch net; 2 cambered screen plates with outer diameter of 130* 250mm can be stretched simultaneously;

2, SPE-cambered screen special sizing table: because the cambered screen stainless steel is only 1 mm thick, the edge is only 15 mm, relatively soft, according to the traditional photosensitized adhesive way can not guarantee the uniform and flat coating, this sizing table is specially designed for cambered screen plate, only used with the screen plate of this machine.

3, SPE-arc screen plate special drying box: two USES of this machine: one is specially for arc screen plate degreasing cleaning and photosensitive glue after screen plate drying and drying; The second is used for shaping resin heating softness.

4, SPE-4632SBJ small plate printer: Arc screen plate can be suitable for all kinds of plate printer; This plate printer is not a special supporting equipment. The machine can place three camber screen plates with the outer diameter of 130* 250mm at the same time for ultraviolet exposure.

Usage and Steps (for reference only)

1. Drag out the platform, cover the substrate on the tooling and fix it with a magnet;

2. Adjust the screws on both sides of the arc fixture according to the radian of the substrate, so as to achieve the basic matching state between the tooling and the arc surface of the substrate; Push the platform into the machine to prepare positioning;

3, will stretch the empty network plate installed on the network framework;

4. Adjust the radian of the screen frame to be basically consistent with the arc surface of the hat printing, and basically determine the position of the printing pattern on the screen plate;

5, get net edition and according to the location of the pattern plate;

6, in order to prevent ink spilt, screen can be affixed around the edge tape;

7. Install the finished screen plate and adjust it to the appropriate position before and after, then lock the two sides of the screen plate with national fixing screws to print.

Random configuration of relevant tools and materials:

1, 8 cm sizing machine

2. One stainless steel arc screen for each of the two models

3, 8cm metal scraper 1 (including rubber strip)

4, screen sealing edge tape 1 disk