SPE-1BS Stencial Isolator

The stencial isolator is a kind of screen printing auxiliary device.our company specially designed this according to the screen printing process encountered in the pattern part of the color separation and printing 2 color case, change traditional one color one screen version.In case of needing to print more than twice.
For example: the back of the sportswear, number is a red; English name is blue, in the past , the basic practice need to do 2 screen version and need to print 2 times then complete the printing. Our company designed this separator, it would make numbers and English name on a screen version half and half, in the printing process, split the screen using the separate, separate from each side color printing materials, printing can be respectively printed on the two colors.

The main advantages of this separator:
1.Improve the work efficiency, when we need to do two frames ,now we just make one screen frame , it can achieve the same effect: need to install twice frames? in the past ,now just need one time to complete the screen printing.
2.Improve the quality of the products; using the separator to complete two colors? printing, do not need to two respectively & multicolor printing of edition, thereby reducing caused by inaccurate & multicolor printing quality problem.

3.Simple installation and operation, only need in the screen frame on both sides according to the need to separate printing group position, separate from the retainer screen frame side, in the middle of the separate and set up with hand tighten the screws can be connected.

4.The separator is suitable for screen frame material that width less than 6 cm, various isolation plate materials of less than 2 cm; the separator can match the height of every screen frame.screen frame material,wood,aluminum alloy and iron materials all can use.
5.it can be used in the narrowest frame with inner diameter 24 cm,the widest frame with inner diameter 45 cm.it is suitable for any aluminum, wood material screen frames.
6.The separator adopts 6 mm steel laser cutting, bending, never deformation and the advanced electrostatic spray surface treatment,never rust.
7.The isolator is configured with related accessories, tools andinstruction manual, users don't need to configure other material again.

3.Isolation plate connection fixed hand screw nut: 2 sets
4.Allen wrench :1 piece